Winchester 94 build

[Dane]

Hello,

I started rebuilding a damaged Winchester 94 about 3 months ago. Due to work I had to leave the project sitting.

I am ready to put the rifle back together but I am unsure of the orientation of the two slides / keepers that were unscrewed from the receiver.

I have a photo of them - but not sure how to attach them on here.

Can anyone help?

Thank you

[TRAP55]

I have no idea what parts you are talking about:confused: Hope this helps.

http://stevespages.com/ipb-winchester-94.html

[Helix_FR]

Slides? There is a left and right extractor and ejector? Click on manage attachments below when you reply and upload the photos that way.

[gdmoody]

Dane, look at the link that TRAP55 posted. The parts in the picture that you emailed me look quite a bit like part number 11 and 12 on that schematic. If so that should clear up the orientation of the two "slides".

[muddober]

Hello,

I started rebuilding a damaged Winchester 94 about 3 months ago. Due to work I had to leave the project sitting.

I am ready to put the rifle back together but I am unsure of the orientation of the two slides / keepers that were unscrewed from the receiver.

I have a photo of them - but not sure how to attach them on here.

Can anyone help?

Thank youDane, I got your email and the pictures of the cartridge guides, I responded to you with where they go and what they do to help get them back in. I hope you got it.

Ron

[Dane]

Thank you for the Stevespages link.

The parts I (miss named) was refering to are the left and right Cartridge Guides. The exploded view was a big help.

Thank you!

[Rocket J Squirl]

There are videos on you tube, darn easy to forget to put the thing-a-ma-giggy inside the whatch-ama-callit