The Firearms Forum banner

lee vs. rcbs

1K views 7 replies 7 participants last post by  mikld 
#1 ·
Can I use rcbs dies with a lee press? TYIA
 
#3 ·
I use Lee dies in my RCBS press, so the threads are the same. Just follow the setup instructions that come with the dies. I think that, with the exception of Dillon, most dies will work with most presses. Someone with more Dillon experience may correct me on that.

What are you reloading?

...And welcome to the forum, David. You've found a great place to ask questions. The only dumb questions here, especially in the reloading section, are the ones not asked. There are probably at least a thousand year's cumulative reloading experience represented here. While you're here, check out the other sections and you'll find we like a good chat, and a good laugh. Pull up a chair and a keyboard and enjoy. But beware...the place can be addicting.
 
#5 ·
Are you just getting started reloading? I'm with Blackeagle - like to know what you are going to reload. Reloading to me is half the fun of shooting. Maybe the best part is turning old 'trusty-rusty' into a tack-driver with all the bragging rights that go with it. Better than just saying 'I buy all of my ammo from WallyWorld and she shoots OK'.
 
#6 ·
I use RCBS, Lee, and Hornady dies in both of my Herter super 3's. It's like car tires. If your car calls for 215/70/15 you can get them from any manufacturer.

I also want to know what you're loading for
 
#7 ·
Thanks for the info guys. I have been reloading for a long time, I just wasn't sure about that. Right now I load 45acp, 38 Spl. 8mm Mauser, and 270. I have to buy 9mm and 40S&W dies; There is a gun show next month and wanted to get all my "ducks in a row" and making my grocery list. Again thanks for the replies, gentleman.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top