Well not all the way, but for those that like using Hornady one shot or Dillon rapid lube 5000 this may be the way to go. I was at my LGS looking for a can of one shot today and they were out, not only that but one shot was also $9.95 for a 5.5oz can! Now I know most of us reload not only for better quality ammo or ammo to feed our addiction when there's none to be found but most of us also reload for the price savings. So since I was having to wait for them to get more one shot in I decided to look up to see if I could make my own case lube and this is what I found. Everybody says to use 1 part Lanolyn to 8 parts 99% isopropyl alcohol, well since I had a few tubes of RCBS case lube hanging around that different folks have given me I decided to use that instead. Also some people suggest that if you can't find the 99% alcohol anywhere you can also use ISO Heet witch is a fuel injector cleaner/ moisture decreaser that can be found at just about any auto parts or Walmart and it also contains 99% isopropyl alcohol. Now use that info at your own risk... Well I did the 8:1 mix and I noticed after resizing about 10 cases that the die started gumming up and denting the case neck on my 5.56x45 brass so I ended up mixing a 16:1 mix and taking the die apart and cleaning it out and after 100 rounds of resizing I had zero issues with the case necks and it glided like a knife through hot butter. I always sort my brass in sandwich baggies and label them what ammo and count them out to 50 and I found out that it only takes about 3/4 of a squirt on them in the bag and roll them around to lube all 50 cases. I will report back on how it's going with the lube if anyone is interested in trying it out themselves.