The Firearms Forum banner

Iver Johnson Revolver

1K views 4 replies 4 participants last post by  RG77 
#1 ·
Hi, I have an Iver Johnson serial # 65218 I'm not sure about the caliber but it can be a 32 or 38 definitely not a 22. Based in the serial #s can someone give me an idea what series this puppy might be? Any additional info would be great as well. Thanks!
 

Attachments

See less See more
3
#3 ·
You have an Iver Johnson 3rd Model Safety Hammerless Automatic revolver made after 1909. Please remove the grips and take a picture of the serial number on the left side of the frame.

To determine caliber take a picture with a ruler and we can determine by size since these were made in small and large frame. The .38 S&W was .360 in diameter so you could also compare the barrel diameter with a .38 Special / 9mm which are .357 /.355 in diameter. The .32 S&W will be much smaller at .314 diameter.
 
#4 ·
Where'd ya find that poor thin? The bottom of a lake??

Glad Shrek was able to help you out and welcome to the forum.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top