The Firearms Forum - Gun Community

The Firearms Forum - Gun Community (http://www.thefirearmsforum.com/index.php)
-   The Ammo & Reloading Forum (http://www.thefirearmsforum.com/forumdisplay.php?f=19)
-   -   can anyone tell me what happened? (http://www.thefirearmsforum.com/showthread.php?t=114241)

44stevenson 09-30-2012 09:27 PM

can anyone tell me what happened?
 
Well I cannot get the photo to load but the case has a big bulge at the bottom close to the rim.

I was sorting through some brass I cleaned getting ready to do some reloading and I found this. Looks like a discharge while not in full battery? Way do you guys think.

aa1911 09-30-2012 10:00 PM

Re: can anyone tell me what happened?
 
was it a Glock you shot it from? if so, that's normal, you need a Redding GRX push thru die.

or a new barrel... like a Lone Wolf, Bar sto, etc...

.40 cal?

look at the primer, if it has a rectangular stamp, it's likely fired from a Glock

44stevenson 09-30-2012 10:17 PM

Re: can anyone tell me what happened?
 
It's a m&p 9mm, using a storm lake barrel. This is the only bulge over ever seen, probably spent 5000 rounds through it

steve4102 09-30-2012 10:20 PM

Re: can anyone tell me what happened?
 
Sure it's your brass?

aa1911 10-01-2012 12:39 AM

Re: can anyone tell me what happened?
 
wow, those are two variables I would not have suspected right off the bat.

any pics? would help a bunch identifying the issue. Are you primarily shooting reloads or new stuff?

44stevenson 10-01-2012 02:38 PM

Re: can anyone tell me what happened?
 
http://sphotos-a.xx.fbcdn.net/hphoto...74235314_n.jpg

finally got this link to work

aa1911 10-01-2012 02:48 PM

Re: can anyone tell me what happened?
 
Woah! yeah, that was definitely not all the way in the barrel when it went boom! surprised it didn't rupture completely.

243winxb 10-01-2012 03:48 PM

Re: can anyone tell me what happened?
 
Check for a bulge in the barrels chamber. May have been an over charge of powder. But does look like it wasnt fully into the chamber???

44stevenson 10-01-2012 06:06 PM

Re: can anyone tell me what happened?
 
the storm lake barrel did have an extremely tight chamber( i couldn't use my lead bullets), so I had sent it to storm lake to open the chamber up a little more. I have no idea when this case happened or even if it was mine, just assuming, but I found this in about 2000 cases i had been cleaning.

RJay 10-01-2012 06:26 PM

Re: can anyone tell me what happened?
 
I don't think I have ever seen anything like that, it looks too perfect for an out of battery ( at least in my opinion ). that sucker looks as if some one was playing with a reloading die.

carver 10-01-2012 06:38 PM

Re: can anyone tell me what happened?
 
Quote:

Originally Posted by RJay (Post 1000542)
I don't think I have ever seen anything like that, it looks too perfect for an out of battery ( at least in my opinion ). that sucker looks as if some one was playing with a reloading die.

RJ, I'm going with you on this one!

mikld 10-01-2012 07:55 PM

Re: can anyone tell me what happened?
 
Quote:

Originally Posted by 44stevenson (Post 1000100)
It's a m&p 9mm, using a storm lake barrel. This is the only bulge over ever seen, probably spent 5000 rounds through it

One out of 5k ain't bad. I'd keep shooting but watch very closely...

JLA 10-01-2012 10:07 PM

Re: can anyone tell me what happened?
 
definitely out of battery. Lucky the casehead held up. toss it and proceed with caution.

judgecrater 10-05-2012 01:03 AM

Re: can anyone tell me what happened?
 
Quote:

Originally Posted by RJay (Post 1000542)
I don't think I have ever seen anything like that, it looks too perfect for an out of battery ( at least in my opinion ). that sucker looks as if some one was playing with a reloading die.

I think you got it. This was not the result of firing, but the result of wrong brass in a sizing die.


All times are GMT -5. The time now is 04:55 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
Copyright ©2002 - 2013, TheFirearmsForum.Com