Schmeisser .25 Auto Disassembly
 

Ratso3
Member
Posts: 2
(3/31/02 12:23:24 pm)
Reply | Edit | Del All Schmeisser-C.G. Haenel Suhl
--------------------------------------------------------------------------------
Hi, I have a friend in Fla. that has no computer to access this answer. He has a small .25 cal. Schmeisser auto pistol which defies his attempts to field strip it for cleaning. Does anyone know and can pass on the procedure?

gun runner john
*TFF Staff*
Posts: 529
(4/1/02 11:10:27 am)
Reply | Edit | Del Re: Schmeisser-C.G. Haenel Suhl
--------------------------------------------------------------------------------
Would this be the gun? If so:

- Unload gun and clear chamber.
- Pull trigger to uncock pistol.
- Lock slide half open by lifting safety into slide notch.
- Remove Mag and engage cutout on bottom rear with groove exposed on tip of recoil spring guide. NOTE: You can use another tool for this also, but the magazine was designed to do this task.
- Lift out barrel.
- You can then remove the recoil guide and spring, and firing pin and spring for cleaning.




Ratso3
Member
Posts: 3
(4/1/02 1:40:43 pm)
Reply | Edit | Del Re: Schmeisser-C.G. Haenel Suhl
--------------------------------------------------------------------------------
Thanks gun-runner John, this puppy had both of us nuts trying to figure it out.

gun runner john
*TFF Staff*
Posts: 531
(4/2/02 9:12:52 am)
Reply | Edit | Del Re: Schmeisser-C.G. Haenel Suhl
--------------------------------------------------------------------------------
It had me going when I got mine too!