Originally Posted by JLA
Stripped screw holes in wood can be repaired with wooden dowel and wood glue. just dab some glue in there, drive a glued dowel in and break it off flush and let it set up. Stripped metal screw holes need to be welded up and re D/T.
I have had good results with gorilla glue on cracked stocks. so long as you can get the glue down into the crack a good ways. Then just clamp it solid and let the glue cure.
JLA.. got ya! I almost mis-read your post.. oops.. I dont have stripped metal.. thanks be to the makers.. just the wood.. it kinda holds the screws.. I assume a hard wood dowel would be best..