The Firearms Forum - Gun Community - View Single Post - Rem. R1 Enhanced slide not locking after last round

Shooter45 · 10-09-2012, 09:15 AM

It sounds like the grip screws are too tight and protruding thru the bushings.
This will allow the screws to rub on the mag, holding it in an awkward angle.

Loosen the grip screws and see if the problem is corrected.

10-09-2012, 09:15 AM	#6
Shooter45 Administrator Join Date: Feb 2001 Contributor Posts: 8,752	Re: Rem. R1 Enhanced slide not locking after last round It sounds like the grip screws are too tight and protruding thru the bushings. This will allow the screws to rub on the mag, holding it in an awkward angle. Loosen the grip screws and see if the problem is corrected.