Re: .410 brass shells: make your own!
made some from 303 yea its a pia easy trick to anneal; leave primer in and stick case in your lead pot the primer keeps the lead out of the inside of the case. gives a nice even heat to your brass. tip 2, use a roll of cork from ace hardware to cut for your over powder and over shot cards. cut with a gasket punch or an old 45 apc brass drill hole in the primer pocket to allow you to push them out after cutting.. tip 3, seal them with wax either bees wax or paraffin from the canning aisle of grocery store or hardware.
never pull your pistol til the talking is all done. When you pull it shoot.