The Firearms Forum - Gun Community - View Single Post

ShawnDow · 12-08-2012, 08:46 PM

Buffalochip.. I took the sights off! Ill try to remember to turn the front one around on re-assembly! And I do have the screws to re-assemble (less the screws for the ferrules)
Whats the best way (or product to use) to get an authentic rust "blue" brown? And would I do that with or without the sights in place?

BillM the wood is hard... but the previous person did all the prep work! I just need to clean and preserve it.. what to use though?.. linseed oil? stain it? Id like it to look a bit old and worn if possible... but well protected.
Now.. is there a way to straighten the ram rod? I have seen rope thrown on the ground that laid straighter than this thing!
Oh, and thanks for the input guys!
Shawn

12-08-2012, 08:46 PM	#9
ShawnDow V.I.P. Member Join Date: Jun 2012 Location: Tawas City, Michigan Posts: 398	Re: Jukar Rifle in .45 Parts? Buffalochip.. I took the sights off! Ill try to remember to turn the front one around on re-assembly! And I do have the screws to re-assemble (less the screws for the ferrules) Whats the best way (or product to use) to get an authentic rust "blue" brown? And would I do that with or without the sights in place? BillM the wood is hard... but the previous person did all the prep work! I just need to clean and preserve it.. what to use though?.. linseed oil? stain it? Id like it to look a bit old and worn if possible... but well protected. Now.. is there a way to straighten the ram rod? I have seen rope thrown on the ground that laid straighter than this thing! Oh, and thanks for the input guys! Shawn __________________ You can't prevent the inevitable.. only alter its time span!