From Rainier:
Quote:
We, at Rainier Ballistics, recommend using lead bullet load data when loading our bullets. There is no need for adjustment when using lead bullet load data. Our bullets are jacketed using an electroplating process and are softer than traditionally jacketed bullets; hence the recommendation to use lead bullet load data.
If you only have access to traditionally jacketed load data, we recommend a starting powder charge directly between the listed minimum and maximum load, and you may use published load data found in reputable reloading manuals.
|
From the data I have you are over Max with lead data and also with most jacketed data. I think you are to hot for those plated bullets. JMO.