The Firearms Forum - Gun Community - View Single Post

Dakota Red 1 · 12-19-2008, 08:59 PM

Hi WRC,
I used these D&A instructions for the Yugo M48, worked fine on my 24/47.

http://surplusrifle.com/yugom48/rifl...mbly/index.asp

Oh, and those barrel bands are a pain.

Edit: Went back and revued the info on that link. The barrel band spring on the M48 is the only difference and that affects steps 15 and 46. The M24/47 band springs are secured with narrow pin projections that run transversly trough the stock. I punched mine out but they are thin, delicate little critters and I'm lucky I didn't mess them up. They don't really need to be removed, only compressed to get the bands off.---Mike

12-19-2008, 08:59 PM	#2
Dakota Red 1 Senior Member Join Date: Nov 2007 Location: Kansas Posts: 504	Re: Yugo M24/47 assembly manual Hi WRC, I used these D&A instructions for the Yugo M48, worked fine on my 24/47. http://surplusrifle.com/yugom48/rifl...mbly/index.asp Oh, and those barrel bands are a pain. Edit: Went back and revued the info on that link. The barrel band spring on the M48 is the only difference and that affects steps 15 and 46. The M24/47 band springs are secured with narrow pin projections that run transversly trough the stock. I punched mine out but they are thin, delicate little critters and I'm lucky I didn't mess them up. They don't really need to be removed, only compressed to get the bands off.---Mike __________________ Warte nur, balde ruhest du auch. Last edited by Dakota Red 1; 12-19-2008 at 09:23 PM..