The Firearms Forum - Gun Community - View Single Post

RogerWilco99 · 04-20-2009, 05:23 PM

I also meant to say that I'm reloading some more .308 tonight and tomorrow. I'm going to bump up the powder a step and load five then bump it up again and load five more up to the load _under_ the max load (four sets in all).

I'm using twice fired Winchester brass and Vihtavouri N150 with 150gr Hornady bullets.

I'm full length resizing and using a set of Lee Pacesetter dies with the factory crimp. That took a bit to figure out. But I like it.

I guess I'll probably have to trim these next time (maybe even this time).

Cheers,
Bruce Lewis

04-20-2009, 05:23 PM	#42
RogerWilco99 Member Join Date: Mar 2009 Location: Atlanta, GA, USA Posts: 22	Re: who's reloading tonight? I also meant to say that I'm reloading some more .308 tonight and tomorrow. I'm going to bump up the powder a step and load five then bump it up again and load five more up to the load _under_ the max load (four sets in all). I'm using twice fired Winchester brass and Vihtavouri N150 with 150gr Hornady bullets. I'm full length resizing and using a set of Lee Pacesetter dies with the factory crimp. That took a bit to figure out. But I like it. I guess I'll probably have to trim these next time (maybe even this time). Cheers, Bruce Lewis __________________ "If you don't learn something new every day, you're not paying attention." - R.A. Lewis, Sr. "If it's not broke, you're not tryin'." - Red Green