Yes sir, im actually taking it to the land after i finish this post... And flannelman, it used to be a Mosin Nagant M91/30 stamped 1929 over the hammer and sicle, I cut the barrel just to the rear of the front sight (used the sight as a guide for the blade), recrowned the barrel with an 11 degree muzzle facing cutter, replaced the stock with an advance technologies fiberglass reinforced camo stock, drilled the reciever for the advanced technologies scope base, polished the trigger components and striker engagement to improve the trigger pull, installed a 1/2 inch wide trigger shoe, removed the rear sight base from the barrel, and sent the bolt off to the boltman for his ATI#2 bolt modification (he has about 30 different designs to choose from. 2 of which are designed for the ATI stock) And 10 weeks later here she is. Not too shabby if I do say so myself...
