Re: Help! Old Muzzleloader Rifle I.D with detailed Pics!
Awesome thanks for the guide. I know have the barrel detached, trigger and firing pin out, sturup off, and now the hammer is at half cocked on the stock. The percussion cap tray thing or the nipple is still on the barrel because someone has already snapped the crew in half it seems, unless if it is really corroded and does not want to come off, but it does seem as if the screw snapped ill try and get pics. Same goes with the screw on the hammer. It seems to be the same case, either its snapped, which I am 99% it is, or its stuck on. I dont know what I'm going to do from here. Should I at least put the trigger, pin, and screw back so i can un-cock the hammer? Or does it matter? In regards to the spring, I dont know if its too much stress to keep it like that for a while right. The barrel looks corroded, or as if it has glue, or laquer residue on it. Its surely in need for a clean. The ram rod I have now doesnt go far enough so I have to go get one, and I need the right size brush. Or should I not use the wired brush inside of the bore, You mentioned before not to use it on the barrels finish of coarse, but what about inside?
Thanks for the help man I appreciate it.
Last edited by Lowsonoma21; 01-22-2010 at 11:41 PM..