Get a Ruger 22/45 and add the VQ kit and be happy! Here is mine and what I put in it and the cost for it all. It is a KILLER gun now that I wouldn't trade for the world! NOTE:
Be sure to get the Replaceable Grip Panel model!
22/45 MK-III Target Model
Exact Edge Extractor,
SureStrike Firing Pin,
Target trigger w/ over-travel screw, return trigger plunger spring and polished plunger,
Mag disconnect removed using Sam's hammer bushing and I installed bpatza @ rimfirecentral.com's Loaded Chamber Indicator (LCI) Cover.
Grips and Mag Bumpers by TechTeach @ rimfirecentral.com Dominic.Notaro@csinet.net
Hammer bushing from Sam Lam @ rimfirecentral.com email@example.com
Cocking Handle by Brian Alcaraz, firstname.lastname@example.org
I Throated her and polished the feed ramp too.
The trigger is MUCH lighter and breaks nice and clean with NO creep and no over-travel. Once I adjusted the take-up as far as I could and still get reliable reset I am left with about 1/32" take-up before you feel resistance then she breaks like glass at maybe a pounds pressure! I doubt I will be making any changes to the setup from this point on other than a special set of grips I have coming!
I have a total of only $258.43 in her not counting the original cost of the gun and Red Dot which was $350 so the total investment is $608.43 and well worth every penny to me!
VC2DN MKII/MKIII TITANIUM DISCONNECTOR
S&H SHIPPING & HANDLING, 9.95
Product: Volquartsen Accurizing Kit
MK III - Silver
Product Code: VC3AK-S
Product: Volquartsen Bolt Tune-Up Kit
Ruger MKI, MKII, MKIII
Product Code: VC3FE
1505GH, Ruger Stainless Steel V-Comp Muzzle Break
Shipping cost, $5.99
bjtraz's Slide Racker
bjtraz @ RFC 22/45 $33.00 shipped.
Grips and Mag Bumpers by TechTeach
@ rimfirecentral.com Dominic.Notaro@csinet.net
Sam's (sg552-2) Hammer Bushing
: $10US Shipped. send cash, or an international money order.
LCI Cover from bpatza at RFC
Shipment once per wk. Preferred payment money order, others excepted, no problem so far.
Send payment with request to Bruce patza, N863 lawn Rd, Seymour WI. 54165.
Regular stainless steel, $18.00 with tracking $19.00
Beadblasted stainless, $19.00 " " $20.00
Hot Blued carbon steel, $21.00 " " $22.00
Shipping to the lower 48 encluded
Set screw, allen wrench, 220 gr. alum.oxide for minor fitting, instruction info. encluded.
please add your contact information so I can contact you if there is a problem or question with your order
Just a note, bead blasted is NOT a factory finish on ruger MKs. It is an aftermarket finish.
Matte blued for the new ruger barrel is ready to go for$22 or $23 with tracking