Re: Jard trigger ??
While it may not be relevant to a JARD trigger in any 22, I put an adjustable JARD in my AR-15 clone. It was not a good move. When the JARD trigger was adjusted for a good let off it was not safe and when adjusted to be safe it was not good let off (lots of creep). I eventually went with a Rock River adjustable two stage trigger. But the bottom line is the JARD was NOT impressive and I'd not buy one of their trigger for any gun again. But others may have had a better experience than me and especially with a JARD trigger not for an AR (??).
The best 10/22 trigger I have found is the Volquartsen. I have one in my 10/22 with their barrel and stock. It is laser accurate nearly matching my Anschutz bolt gun, (Silhouette Model 64 receiver with fully adjustable two stage trigger). Both shoot groups near or less than 1/2 inch at 50 feet off the bench averaged over at least five 5 shot groups.
I installed a Clark trigger for a friend in his 10/22 and I had to stone it to get to come close to matching what the Volquartsen trigger parts did out of the box. I was NOT impressed by the Clark trigger parts.
Sorry, I missed that it was a 77/22 not a 10/22 but I'd still look at Volquartsen for trigger parts if they make them.
Last edited by LDBennett; 11-06-2011 at 06:51 AM..