Quote:
Originally Posted by m63
Hello,
Thank you for posting details Rem 7400 disassembly directions. I got as far as trying to remove the pin that secures the bolt handle to the bolt, but I cannot seem to get pin to come out. I've bent three punches doing it. Is there a trick to it or is it unusually tight to remove? - Thanks
|
First make sure the bolt is lined up with the notch in the receiver so you can get a punch properly allined to it. Punch the pin out from the top so it drops out of the bottom of the gun. The pin is splined so it only goes one way. If one way won't come out, try the other way. If the gun was ever taken apart before its possible the pin is in backwards.