Point Blank Ballistic Software

jamesed · 02-05-2005, 11:31 PM

I don't know howmany people use ballistic software on thier computers to work up and store loads but I do.

I don't know if there is abetter software out there but I use Point Blank Ballistic software. It has a very good price (free) and has a lot of features.

I especially like the ability to print out all the ballistic data sheets for my loads and and check it at the range.

When I find a good accurate load I cut the ballistic chart out of the data sheet and laminate the load ballistic data and place on the underside of the bill on my cap. This gives me instant access for the particular load in my rifle.

HI-5-O · 02-06-2005, 02:46 PM

Aloha Jamesed,

Where can I get a copy of this software? Sounds interesting! Free sounds great too!

Mahalo,
Keith

armedandsafe · 02-06-2005, 03:27 PM

Take a look here:
http://stevespages.com/page8b.htm

Pops

Kimber Man · 02-07-2005, 08:45 PM

Thank You for the Address.........I get one myself

HI-5-O · 02-07-2005, 11:28 PM

Wow Pops that a lot of info there.

As they say here in Hawaii:

MAHALO PLENTY !!!!!

jamesed · 02-08-2005, 01:26 PM

In working with point blank, if you have powders and projectiles that are not in the data base you can add your projectiles and powers to the various data bases.

If you have a projectile and don't have a ballitic coefficient for the projectile if you know the velocities at muzzel and at 100 yds, you can calculate recoil, cross sectional density, bullet energy, Taylon Knock Down Factor etc.

You can compare the ballistics by different colors of different loads.

Like I said it has lots of features.

02-05-2005, 11:31 PM	#1
jamesed Member Join Date: Jan 2005 Location: Clackamas County Oregon Posts: 38	Point Blank Ballistic Software I don't know howmany people use ballistic software on thier computers to work up and store loads but I do. I don't know if there is abetter software out there but I use Point Blank Ballistic software. It has a very good price (free) and has a lot of features. I especially like the ability to print out all the ballistic data sheets for my loads and and check it at the range. When I find a good accurate load I cut the ballistic chart out of the data sheet and laminate the load ballistic data and place on the underside of the bill on my cap. This gives me instant access for the particular load in my rifle. -->

02-06-2005, 02:46 PM	#2
HI-5-O Member Join Date: Dec 2004 Posts: 34	Re: Point Blank Ballistic Software Aloha Jamesed, Where can I get a copy of this software? Sounds interesting! Free sounds great too! Mahalo, Keith

02-06-2005, 03:27 PM	#3
armedandsafe Former Guest Join Date: Dec 2002 Location: Moses Lake, WA Posts: 10,344	Re: Point Blank Ballistic Software Take a look here: http://stevespages.com/page8b.htm Pops

02-07-2005, 08:45 PM	#4
Kimber Man Senior Member Join Date: May 2004 Location: Florida Posts: 811	Re: Point Blank Ballistic Software Thank You for the Address.........I get one myself

02-07-2005, 11:28 PM	#5
HI-5-O Member Join Date: Dec 2004 Posts: 34	Re: Point Blank Ballistic Software Wow Pops that a lot of info there. As they say here in Hawaii: MAHALO PLENTY !!!!!

02-08-2005, 01:26 PM	#6
jamesed Member Join Date: Jan 2005 Location: Clackamas County Oregon Posts: 38	Re: Point Blank Ballistic Software In working with point blank, if you have powders and projectiles that are not in the data base you can add your projectiles and powers to the various data bases. If you have a projectile and don't have a ballitic coefficient for the projectile if you know the velocities at muzzel and at 100 yds, you can calculate recoil, cross sectional density, bullet energy, Taylon Knock Down Factor etc. You can compare the ballistics by different colors of different loads. Like I said it has lots of features.