|
|
|
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
02-23-2003, 10:14 PM
|
#1 |
|
Advanced Senior Member
Join Date: Jan 2003
Location: Deep Piney Woods of East Texas
Posts: 5,116
|
Schmeisser .25 Auto Disassembly
Ratso3
Member Posts: 2 (3/31/02 12:23:24 pm) Reply | Edit | Del All Schmeisser-C.G. Haenel Suhl -------------------------------------------------------------------------------- Hi, I have a friend in Fla. that has no computer to access this answer. He has a small .25 cal. Schmeisser auto pistol which defies his attempts to field strip it for cleaning. Does anyone know and can pass on the procedure? gun runner john *TFF Staff* Posts: 529 (4/1/02 11:10:27 am) Reply | Edit | Del Re: Schmeisser-C.G. Haenel Suhl -------------------------------------------------------------------------------- Would this be the gun? If so: - Unload gun and clear chamber. - Pull trigger to uncock pistol. - Lock slide half open by lifting safety into slide notch. - Remove Mag and engage cutout on bottom rear with groove exposed on tip of recoil spring guide. NOTE: You can use another tool for this also, but the magazine was designed to do this task. - Lift out barrel. - You can then remove the recoil guide and spring, and firing pin and spring for cleaning. Ratso3 Member Posts: 3 (4/1/02 1:40:43 pm) Reply | Edit | Del Re: Schmeisser-C.G. Haenel Suhl -------------------------------------------------------------------------------- Thanks gun-runner John, this puppy had both of us nuts trying to figure it out. gun runner john *TFF Staff* Posts: 531 (4/2/02 9:12:52 am) Reply | Edit | Del Re: Schmeisser-C.G. Haenel Suhl -------------------------------------------------------------------------------- It had me going when I got mine too! |
|
|
 |
| Thread Tools | |
|
|
