The Firearms Forum - Gun Community  
TheFirearmsForum.com
FOUNDED: February 9, 2001
If you prefer to make a donation by check,
send an email to Support for the mailing address.

Go Back   The Firearms Forum - Gun Community > Firearms > Black Powder Shooting / Muzzleloaders / Handguns

Notices


Reply
 
Thread Tools
Old 09-25-2012, 09:24 PM   #1
45nut
Advanced Senior Member
 
45nut's Avatar
 
Join Date: Jul 2006
Location: Dallas, TX
Posts: 3,428
Default Cleaning grease question

I have a Lyman's Great Plains Rifle .50 Hawken copy. I hadn't shot it in a while. Decided to take it and smoke up the county. I snapped some caps with the tissue trick to make sure I was getting fire through the hole and went to shoot.

Loaded her up and had this vagrant thought of maybe doing a powder/patch first just to make sure everything was okay. I didn't and I got my first ball pull job since I started shooting BP way back in 73 or 74. I didn't even have one so I had to go to BPS and buy one. Put the barrell in a bucket of water and pulled the ball the next day.

Cleaned the barrel today how I was trained, boiling hot soapy water and let it air dry. Now the question, do you use some kind of grease after cleaning? And what?
__________________
A gun is a tool, Marian; no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that. Shane

Nemo me impune lacesset

We recall the case of the Shoshone war band which showed up complete with one 30-30 rifle per man the week after Pearl Harbor, and simply wanted to have the enemy pointed out to them. "We hear there's a war going on and we want to go fight it." Jeff Cooper

KCCO

-->
45nut is offline   Reply With Quote
Old 09-25-2012, 09:32 PM   #2
jack404
Former Guest
 
Join Date: Jan 2010
Location: Australia
Contributor
Posts: 17,622
Default Re: Cleaning grease question

SBGO here , ed's red before i became a SBGO convert

for each pint of mix of ed's red i'd add 150 grams of lanolin ( wool grease)

no need with the SBGO its got lithium and moly far better ..

Last edited by jack404; 09-25-2012 at 09:33 PM..
jack404 is offline   Reply With Quote
Old 09-25-2012, 11:38 PM   #3
mogunner
Advanced Senior Member
 
Join Date: Oct 2011
Location: Eastern Missouri
Posts: 1,029
Default Re: Cleaning grease question

I run a patch with a fair coating of bore butter on it then a dry patch. No problems.
mogunner is offline   Reply With Quote
Old 09-26-2012, 01:50 AM   #4
aa1911
Advanced Senior Member
 
aa1911's Avatar
 
Join Date: Dec 2010
Location: Pacific Northwest
Posts: 3,115
Default Re: Cleaning grease question

I've used T/C's bore butter for two decades now, works like a charm. Not as important as what you use (within reason of course), but rather that you just take regular care each time you shoot.

I still have a lard can almost full of bear grease from a buddy's bear years ago, used that for patch lube for a while also. Just rendered down bear fat, lots of uses in the black powder arena.

SBGO is a favorite around here though too, can't go wrong with that.
__________________
"Loud noises don't end gunfights.... well placed shots do."

aa1911 is offline   Reply With Quote
Old 09-26-2012, 05:16 AM   #5
Hawg
Advanced Senior Member
 
Join Date: Mar 2011
Posts: 1,559
Default Re: Cleaning grease question

I use Bore Butter but I always fire a blank charge to burn it all out before I load it. Don't do that with petroleum based lubes. If you use anything petro based make sure its all cleaned out before you load it.
Hawg is offline   Reply With Quote
Old 11-05-2012, 06:02 PM   #6
Gunslinger9378
Member
 
Join Date: Nov 2012
Posts: 3
Default Re: Cleaning grease question

Dear 45nut,
Really depends on the climate you live in. In an Arizona summer, bore butter will melt and run all over the place. I have it on good authority that if you mix BB with some beeswax, it will stiffen up quite a bit. You'd have to experiment on the ratio's of BB to Beeswax though!
Johnnie Roper,Alias:Gunslinger9378.
Gunslinger9378 is offline   Reply With Quote
Old 11-05-2012, 06:57 PM   #7
Hawg
Advanced Senior Member
 
Join Date: Mar 2011
Posts: 1,559
Default Re: Cleaning grease question

Bore Butter will run in anybody's summer heat but he was asking about protection after cleaning.
Hawg is offline   Reply With Quote
Old 11-06-2012, 05:39 AM   #8
Shooter45
*Administrator*
 
Join Date: Feb 2001
Contributor
Posts: 8,753
Default Re: Cleaning grease question

I use nothing but SBGO.
Shooter45 is offline   Reply With Quote
Old 11-06-2012, 03:36 PM   #9
armedandsafe
Former Guest
 
armedandsafe's Avatar
 
Join Date: Dec 2002
Location: Moses Lake, WA
Posts: 10,344
Default Re: Cleaning grease question

Ballistol is what I use for the entire rifle/pistol. I have no connection with them but as a satisfied user.

http://www.ballistol.com/1_Ballistol...r%20PROOF3.pdf
http://www.ballistol.com/

Pops

Last edited by armedandsafe; 11-06-2012 at 03:37 PM..
armedandsafe is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:33 PM.

STILL SEARCHING FOR SOMETHING? TRY THE TFF "GOOGLE" SEARCH ENGINE BELOW!
Google

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
Copyright ©2002 - 2013, TheFirearmsForum.Com