once shot brass capacity different why!!!!!!!! - The Firearms Forum

billr · 05-11-2005, 09:16 PM

Loading Benchmark , several of the cases overfilled , I checked the powder charge on a beam scales and they read correctly at 26 grains . I am using once fired brass, the majority of the cases filled up to 1/4 inch from the top, any ideas ?
Why the case capacity being that different.
PS, I hope that Benchmark shoots as it is a neat powder to work with.

billr · 05-11-2005, 10:39 PM

problem solved tumbling medium packed in case around primer.

Smoky14 · 05-12-2005, 11:19 AM

Good catch bill. If something doesn't smell right it usually isn't. You probably just saved turning a good gun into a paper weight.

Smoky the been there done exactly that guy.

LDBennett · 05-13-2005, 08:12 AM

Years ago when I got my Dillon vibrational cleaner, I used their liquid cleaner in it. I'd dump the brass in, poor the clenaer on top, put the cover on and turn it on. I stopped using that approach when at the range a primer went off without setting the powder off and pushed the bullet about an inch or two into the barrel. Luckily I realized the problem without packing a second bullet behind the stuck first one. A glob of the corn cob media, stuck together wiht the polishing liquid was stuck in the bottom on the case. The primer went off with enough force to send the bullet part way up the barrel and the glob isolated the powder from the heat of the primer so the powder did not ignite.

I now make it a practice to rattle the empty brass around after cleaning to knock out any media and I pore the liquid cleaner in the empty Dillon cleaner, running it for a minute or so to distribute it around the media before adding the brass.

LDBennett

Marlin · 05-13-2005, 08:27 AM

Good tip, LD.

verdejt · 05-15-2005, 09:00 AM

I use the liquid polish in my media when I polish my brass. I however wait until after the brass has been cleaned and polished before I deprime. That way I can catch the above cited case and don't have worry about that too often. However that doesn't mean that I don't check each case inside and out for problems.

05-11-2005, 09:16 PM	#1
billr Member Join Date: Oct 2004 Location: oregon Posts: 44	once shot brass capacity different why!!!!!!!! Loading Benchmark , several of the cases overfilled , I checked the powder charge on a beam scales and they read correctly at 26 grains . I am using once fired brass, the majority of the cases filled up to 1/4 inch from the top, any ideas ? Why the case capacity being that different. PS, I hope that Benchmark shoots as it is a neat powder to work with. -->

05-11-2005, 10:39 PM	#2
billr Member Join Date: Oct 2004 Location: oregon Posts: 44	Re: once shot brass capacity different why!!!!!!!! problem solved tumbling medium packed in case around primer.

05-12-2005, 11:19 AM	#3
Smoky14 Senior Member Join Date: Nov 2001 Location: Nowhere NM Posts: 656	Re: once shot brass capacity different why!!!!!!!! Good catch bill. If something doesn't smell right it usually isn't. You probably just saved turning a good gun into a paper weight. Smoky the been there done exactly that guy.

05-13-2005, 08:12 AM	#4
LDBennett Advanced Senior Member Join Date: Dec 2003 Location: Hesperia, CA Posts: 5,718	Re: once shot brass capacity different why!!!!!!!! Years ago when I got my Dillon vibrational cleaner, I used their liquid cleaner in it. I'd dump the brass in, poor the clenaer on top, put the cover on and turn it on. I stopped using that approach when at the range a primer went off without setting the powder off and pushed the bullet about an inch or two into the barrel. Luckily I realized the problem without packing a second bullet behind the stuck first one. A glob of the corn cob media, stuck together wiht the polishing liquid was stuck in the bottom on the case. The primer went off with enough force to send the bullet part way up the barrel and the glob isolated the powder from the heat of the primer so the powder did not ignite. I now make it a practice to rattle the empty brass around after cleaning to knock out any media and I pore the liquid cleaner in the empty Dillon cleaner, running it for a minute or so to distribute it around the media before adding the brass. LDBennett

05-13-2005, 08:27 AM	#5
Marlin TFF Admin Staff Chief Counselor Join Date: Mar 2003 Location: At SouthernMoss' side forever! Contributor Posts: 13,853	Re: once shot brass capacity different why!!!!!!!! Good tip, LD. __________________ *The flag represents a living country and is itself considered a living thing.* *The only criminal class native to the United States is Congress.*

05-15-2005, 09:00 AM	#6
verdejt V.I.P. Member Join Date: Jan 2005 Posts: 59	Re: once shot brass capacity different why!!!!!!!! I use the liquid polish in my media when I polish my brass. I however wait until after the brass has been cleaned and polished before I deprime. That way I can catch the above cited case and don't have worry about that too often. However that doesn't mean that I don't check each case inside and out for problems. __________________ It is better to have and not need than to need and not have.