|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Member
Join Date: Oct 2005
Location: Stillwater Oklahoma
Posts: 45
|
--------------------------------------------------------------------------------
Traded for a no 4 yesterday. Not sure where it's from. On the left side i found No4MKIROF{F}6/43, the ser.DC28===A on the barrel it has a circle with a D in it and 2 stamps with the crown one has 25 underit and the other53 they both have an N under them also. And the CAI importer mark. It was very crusty Barrel was full of grease the muzzel looked dark but the rifleing ran all the way to the end so i brought it home. Barrel cleaned up alright just a little rusty in the lands toward the chamber end the rest of the barrel is fine toward the muzzle it's great! Think it's from getting to hot? Won't feed the first round bolt just misses the rims if you kinda cock the bolt down it might if it does the round will jump up and jam into the upper left side of the chamber does better with the clip out of my no1 but not good. I've tweeked the lips went from one problem to another. It shoots good!!! very good off the hood of the car last night shot into an 1 1/2" at 40y. Got to get one of those long rifles now!
-->
|
|
|
|
|
|
#2 |
|
*TFF Admin Staff Mediator*
Join Date: Feb 2001
Location: Minn-eeee-sota, ya, sure, you bet!
Posts: 9,144
|
Are we talking about an Enfield rifle here?
|
|
|
|
|
|
#3 |
|
Member
Join Date: Oct 2005
Location: Stillwater Oklahoma
Posts: 45
|
Yes a No4 Mk1
|
|
|
|
|
|
#4 | |
|
Advanced Senior Member
Join Date: Aug 2002
Location: Texas
Posts: 5,138
|
Quote:
Some light reading: http://www.webpages.uidaho.edu/~stratton/Enhistory.htm |
|
|
|
|
![]() |
| Thread Tools | |
|
|