Originally Posted by VonVega
Thanks Big Shrek, I saw that schematic on the parts page when I bought the firing pin. I was hoping for one that showed a bit more detail on how the bolt comes apart and goes back together. I can pull the bolt out without removing the barrel. But I have no idea how to get into it, say if I needed to change out the mainspring
I also might be mistaking the firing pin for the striker. Any idea which piece actually hits the cartridge?
I've got a Buddy on another site who owns one of these...I've sent him an IM asking him for details & hopefully some pics of how the bolt breaks down
He says all ya gotta do is simply drive the pin out of the bolt, and the FP drops right out.
Maybe a little WD-40, because you never know how gunky it is up there...those pins often need a little help.