|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
V.I.P. Member
Join Date: Dec 2010
Location: Anti-Gun, Illinois
Posts: 172
|
I have a DPMS sportico (5.56) and both mags fail to feed. I might get two consecutive rounds if I am lucky... What am I doing wrong or is it the mags? Does it with different types of ammo too. Is there a more reliable mag out there that will turn my single shot ar back into a semi auto>?
-->
|
|
|
|
|
|
#2 |
|
*TFF Moderator/Host*
Join Date: Apr 2009
Location: Imperial, MO
Posts: 3,617
|
Mag change would be the first thing I would go after with a feed problem but is it really a feed problem or a cycle problem? there was a issues with the sportical uppers were the gas blocks were not properly aligned with the gas port in the barrel so the gun would short cycle and eject but not far enough to get the next round. If it cycles OK by hand, you may want to check the block for alignment issues
__________________
Only cowards shoot with their eyes closed.... helixgunsmith.com Last edited by Helix_FR; 04-22-2011 at 11:36 PM.. |
|
|
|
|
|
#3 |
|
V.I.P. Member
Join Date: Dec 2010
Location: Anti-Gun, Illinois
Posts: 172
|
Helix - that is exactly what it is doing. I will check the alignment. Thanks
|
|
|
|
![]() |
| Thread Tools | |
|
|