|
|
|
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
02-23-2003, 10:47 PM
|
#1 |
|
Advanced Senior Member
Join Date: Jan 2003
Location: Deep Piney Woods of East Texas
Posts: 5,116
|
High Standard Double Nine Disassembly
Cricket67
Member Posts: 5 (2/21/02 6:31:33 pm) Reply | Edit | Del All High Standard Double Nine -------------------------------------------------------------------------------- Can anyone help me to take apart my High Standard Double nine so I can reblue it? I am having trouble taking out the cylinder and barrel. AntiqueDr *TFF Senior Staff* Posts: 2113 (2/21/02 6:47:33 pm) Reply | Edit | Del ezSupporter Re: High Standard Double Nine -------------------------------------------------------------------------------- Not very much of that gun can be blued. The barrels are pinned to the frame. The pin is located on the frame between the cylinder face and the barrel shoulder. Removal is not advisable unless you need to replace the barrel. Are you trying to remove the cylinder and crane assembly as a unit, or are you trying to disassemble the cylinder? We Buy Guns! 1 - 100, Antique or Modern! www.apaxenterprises.com Cricket67 Member Posts: 6 (2/21/02 7:03:27 pm) Reply | Edit | Del Re: High Standard Double Nine -------------------------------------------------------------------------------- I figured as much with the barrel and did not attempt to do this. However, I would like to get the cylinder out at least. I noticed that only the barrel, cylinder, and hammer are blued, and I think the frame is a mat blue finish like my CZ, like a parkerized finish but more grey. Any tips on this as well? Thanks, |
|
|
 |
| Thread Tools | |
|
|
