17 Mack 2 - The Firearms Forum

lonewolf204 · 07-30-2011, 09:51 PM

Does anybody shoot the 17 mach2? Have had any problems with it, how do you like it?

gdmoody · 07-30-2011, 10:43 PM

I have a 17Mach2 conversion barrel for my Ruger 10/22 that I really do like. I also HAD a bolt action 17Mach 2 that I traded off. I really like that little round and now I kick myself when I think of trading it off!

gunplumber · 07-31-2011, 09:11 AM

I have a Rem 511 that I relined to 17m2. Drilled and tapped it and put on a Tasco 6x18x50. At the time I had 19 different 22 rifles. Now I own I think only 3 and use the little Rem for everything I used to use a 22 for. It is my most fun favorite rifle, bar none. I have made these conversions for folks from Calif. to Florida and without a single exception, everybody loves them. Getting ammo seems to be the only problem.

lonewolf204 · 07-31-2011, 09:23 AM

The reason I was asking is I have a Savage that is splitting the brass and not ejecting it al the the time. I was wondering if anybody else had a simular problem?

gunplumber · 07-31-2011, 12:58 PM

Split cases are rather a common problem with this round; if I remember right, they anneal Stinger brass to neck it down. I have not experienced any extraction or ejection problems even in the Ruger factory pencil bbls I have worked on.

lonewolf204 · 07-31-2011, 03:30 PM

I've only had this problem with the savage. My Ruger and Marlin eject ok.

popgun · 08-17-2011, 12:52 PM

my problem is that here in AZ it's hard to find and not enough guns are chambered in it. IMHO it may be on it's way out, and become another dead caliber.

GunHugger · 08-18-2011, 01:49 PM

I love my Savage in MKII, one of my favorite rimfires.

I had a few boxes of ammo that were spilting but the last three or four boxes have been fine.

Very accurate, I love it the grackles don't.

07-30-2011, 09:51 PM	#1
lonewolf204 Senior Member Join Date: Apr 2011 Location: Oklahoma Contributor Posts: 792	17 Mack 2 Does anybody shoot the 17 mach2? Have had any problems with it, how do you like it? __________________ Fear is only a word in the mind of the weak! -->

07-30-2011, 10:43 PM	#2
gdmoody Advanced Senior Member Join Date: Sep 2007 Location: Northeast Georgia Contributor Posts: 6,343	Re: 17 Mack 2 I have a 17Mach2 conversion barrel for my Ruger 10/22 that I really do like. I also HAD a bolt action 17Mach 2 that I traded off. I really like that little round and now I kick myself when I think of trading it off! __________________ NRA Endowment Member GeorgiaCarry.Org Member Retired US Army Postal Worker Personally, I carry a gun because I'm too young to die and too old to take an ass whoopin'.....author unknown (but obviously brilliant)

07-31-2011, 09:11 AM	#3
gunplumber V.I.P. Member Join Date: Apr 2010 Location: Oklahoma Posts: 370	Re: 17 Mack 2 I have a Rem 511 that I relined to 17m2. Drilled and tapped it and put on a Tasco 6x18x50. At the time I had 19 different 22 rifles. Now I own I think only 3 and use the little Rem for everything I used to use a 22 for. It is my most fun favorite rifle, bar none. I have made these conversions for folks from Calif. to Florida and without a single exception, everybody loves them. Getting ammo seems to be the only problem.

07-31-2011, 09:23 AM	#4
lonewolf204 Senior Member Join Date: Apr 2011 Location: Oklahoma Contributor Posts: 792	Re: 17 Mack 2 The reason I was asking is I have a Savage that is splitting the brass and not ejecting it al the the time. I was wondering if anybody else had a simular problem? __________________ Fear is only a word in the mind of the weak!

07-31-2011, 12:58 PM	#5
gunplumber V.I.P. Member Join Date: Apr 2010 Location: Oklahoma Posts: 370	Re: 17 Mack 2 Split cases are rather a common problem with this round; if I remember right, they anneal Stinger brass to neck it down. I have not experienced any extraction or ejection problems even in the Ruger factory pencil bbls I have worked on.

07-31-2011, 03:30 PM	#6
lonewolf204 Senior Member Join Date: Apr 2011 Location: Oklahoma Contributor Posts: 792	Re: 17 Mack 2 I've only had this problem with the savage. My Ruger and Marlin eject ok. __________________ Fear is only a word in the mind of the weak!

08-17-2011, 12:52 PM	#7
popgun V.I.P. Member Join Date: Sep 2009 Posts: 403	Re: 17 Mack 2 my problem is that here in AZ it's hard to find and not enough guns are chambered in it. IMHO it may be on it's way out, and become another dead caliber.

08-18-2011, 01:49 PM	#8
GunHugger Advanced Senior Member Join Date: Jul 2007 Location: SW PA Posts: 1,161	Re: 17 Mack 2 I love my Savage in MKII, one of my favorite rimfires. I had a few boxes of ammo that were spilting but the last three or four boxes have been fine. Very accurate, I love it the grackles don't. __________________ . “There will be a revolution in this country!” “I don’t believe people should to be able to own guns.” ~Barack Obama "Stand your ground. Don't fire unless fired upon, but if they mean to have a war let it begin here." ~Captain John Parker, to his Minute Men on Lexington Green, April 19, 1775.