10/22 sight/sighting Qs - The Firearms Forum

Anhedonius · 12-14-2011, 04:38 PM

Hey all, I'm new here and to the 10/22. It has a Williams peep on the rear, and what looks like the stock front sight. That sight's brass button is lost. I ordered a Williams Firesight to replace it, not sure if I ordered the right height.
The existing front is .406" from bottom of dovetail to top of sight. It shoots an inch high at 15 yards (longest range available where I was), with the rear peep lowered about 2/3 of the way down. I ordered the next size taller Firesight, .450".
QUESTIONS: 1. At 15 yards, will the extra .044" height bring the prints down about an inch?
2. How will this setup work at 50 and 100 yards?
Any help appreciated.

rcairflr · 12-14-2011, 05:06 PM

Here's what I got for a quick calculation. If you raise the front sight .044 inches it will change your point of impact:

15 yards: -1.58 inches
50 yards: -5.28 inches
100 yards: -10.56 inches

Of course this does not take into accout the inherent bullet drop due to the greater distances between 15 and 100 yards.

This is also assuming that your sights are the same distance apart as my 10/22, which is 15 inches.

Dirtypacman · 12-15-2011, 10:09 AM

I suggest replacing the 10/22 stock sights if you have the $ to do so.
Putting something like tech sights on them make for a much better experience.

12-14-2011, 04:38 PM	#1
Anhedonius Member Join Date: Dec 2011 Posts: 1	10/22 sight/sighting Qs Hey all, I'm new here and to the 10/22. It has a Williams peep on the rear, and what looks like the stock front sight. That sight's brass button is lost. I ordered a Williams Firesight to replace it, not sure if I ordered the right height. The existing front is .406" from bottom of dovetail to top of sight. It shoots an inch high at 15 yards (longest range available where I was), with the rear peep lowered about 2/3 of the way down. I ordered the next size taller Firesight, .450". QUESTIONS: 1. At 15 yards, will the extra .044" height bring the prints down about an inch? 2. How will this setup work at 50 and 100 yards? Any help appreciated. -->

12-14-2011, 05:06 PM	#2
rcairflr Advanced Senior Member Join Date: Jul 2011 Location: Wichita, Ks Posts: 1,347	Re: 10/22 sight/sighting Qs Here's what I got for a quick calculation. If you raise the front sight .044 inches it will change your point of impact: 15 yards: -1.58 inches 50 yards: -5.28 inches 100 yards: -10.56 inches Of course this does not take into accout the inherent bullet drop due to the greater distances between 15 and 100 yards. This is also assuming that your sights are the same distance apart as my 10/22, which is 15 inches. Last edited by rcairflr; 12-14-2011 at 05:07 PM..

12-15-2011, 10:09 AM	#3
Dirtypacman Senior Member Join Date: Mar 2008 Location: Merrimac Valley, MA Posts: 908	Re: 10/22 sight/sighting Qs I suggest replacing the 10/22 stock sights if you have the $ to do so. Putting something like tech sights on them make for a much better experience. __________________ Member HHRG and HSC, NRA Life Member, GOAL Member LTC-A