FNG here, need parts for a small pistol - The Firearms Forum

Bill Pistol · 03-22-2011, 11:07 PM

Hi, I'm Bill. I have a small pistol marked .25 CAL. GUARDIAN on the slide. It was imported by FIE Corp. of Miami, FL. I need the trigger, trigger return spring, and the link that connects the trigger to the lever that trips the sear. I think everything else is there and working. The pistol isn't worth much at all, but I hate the idea of a non-functional gun. Thanks for any help,

Bill

RJay · 03-23-2011, 12:18 AM

Bill, I think you are between a rock and a hard place. Unless you can ID the maker you wont find any parts. FIE ( after 1968 ) also assembled guns from imported parts after the 1968 Gun Control law shut off their supply of small inexpensive guns from over seas. Your gun could be a Rohm RG, a Reck or even a EM-GE ( Gerstenberger & Eberwein ). It even bears a little resemblance to a Galesi Model 9. Perhaps someone can recoginize the maker, other wise it will make a good paper weight. Sorry about that.

Bill Pistol · 03-23-2011, 10:09 AM

It's a Rigarmi Model 193, aka FIE Guardian G-27. Bob's Gun Parts says they have what I need.

RJay · 03-23-2011, 04:10 PM

Rigarmi, The son of one of the Galesi brothers, based on the Galesi .25 autos

, I knew it had some of the lines of the Galesi. I read in one of the forums that Bob has been having some health problems, if he is unable to supply the parts try Numrich and or Jack First. Good luck.

pickenup · 03-23-2011, 08:46 PM

Welcome to The Firearms Forum, Bill.

You might try these guys if Bob's doesn't come through.

http://www.gunpartscorp.com/

Jim K · 03-23-2011, 09:25 PM

I suspect that whatever the parts cost will be more than the gun will be worth in working condition.

Jim

Bill Pistol · 03-26-2011, 01:38 PM

Its worth is for me to decide. It's my gun and my money.

Bill Pistol · 03-26-2011, 01:39 PM

Thanks for the help, guys, much appreciated.

RJay · 04-16-2011, 03:03 PM

Pinky, see your other posting. Multiple postings and tacking on to an old posting just confuses matters. It's best to just post once

jartisjr · 04-30-2012, 08:34 PM

looking for a magazine for a fie guardian 25acp purchased in 1973

RJay · 04-30-2012, 09:21 PM

Try http://www.gun-parts.com

03-22-2011, 11:07 PM	#1
Bill Pistol Member Join Date: Mar 2011 Posts: 15	FNG here, need parts for a small pistol Hi, I'm Bill. I have a small pistol marked .25 CAL. GUARDIAN on the slide. It was imported by FIE Corp. of Miami, FL. I need the trigger, trigger return spring, and the link that connects the trigger to the lever that trips the sear. I think everything else is there and working. The pistol isn't worth much at all, but I hate the idea of a non-functional gun. Thanks for any help, Bill Attached Images -->

03-23-2011, 12:18 AM	#2
RJay Advanced Senior Member Join Date: Feb 2004 Location: Arizona Posts: 3,487	Re: FNG here, need parts for a small pistol Bill, I think you are between a rock and a hard place. Unless you can ID the maker you wont find any parts. FIE ( after 1968 ) also assembled guns from imported parts after the 1968 Gun Control law shut off their supply of small inexpensive guns from over seas. Your gun could be a Rohm RG, a Reck or even a EM-GE ( Gerstenberger & Eberwein ). It even bears a little resemblance to a Galesi Model 9. Perhaps someone can recoginize the maker, other wise it will make a good paper weight. Sorry about that. __________________ RonJames

03-23-2011, 10:09 AM	#3
Bill Pistol Member Join Date: Mar 2011 Posts: 15	Re: FNG here, need parts for a small pistol It's a Rigarmi Model 193, aka FIE Guardian G-27. Bob's Gun Parts says they have what I need. __________________ Bill Pistol Last edited by Bill Pistol; 03-23-2011 at 10:10 AM..

03-23-2011, 04:10 PM	#4
RJay Advanced Senior Member Join Date: Feb 2004 Location: Arizona Posts: 3,487	Re: FNG here, need parts for a small pistol Rigarmi, The son of one of the Galesi brothers, based on the Galesi .25 autos, I knew it had some of the lines of the Galesi. I read in one of the forums that Bob has been having some health problems, if he is unable to supply the parts try Numrich and or Jack First. Good luck. __________________ RonJames

03-23-2011, 08:46 PM	#5
pickenup Advanced Senior Member Join Date: Sep 2002 Location: Colorado Rocky Mountains Posts: 6,837	Re: FNG here, need parts for a small pistol Welcome to The Firearms Forum, Bill. You might try these guys if Bob's doesn't come through. http://www.gunpartscorp.com/ __________________ The gene pool needs chlorine

03-23-2011, 09:25 PM	#6
Jim K Advanced Senior Member Join Date: Dec 2009 Posts: 6,408	Re: FNG here, need parts for a small pistol I suspect that whatever the parts cost will be more than the gun will be worth in working condition. Jim

03-26-2011, 01:38 PM	#7
Bill Pistol Member Join Date: Mar 2011 Posts: 15	Re: FNG here, need parts for a small pistol Its worth is for me to decide. It's my gun and my money. __________________ Bill Pistol

03-26-2011, 01:39 PM	#8
Bill Pistol Member Join Date: Mar 2011 Posts: 15	Re: FNG here, need parts for a small pistol Thanks for the help, guys, much appreciated. __________________ Bill Pistol

04-16-2011, 03:03 PM	#9
RJay Advanced Senior Member Join Date: Feb 2004 Location: Arizona Posts: 3,487	Re: FNG here, need parts for a small pistol Pinky, see your other posting. Multiple postings and tacking on to an old posting just confuses matters. It's best to just post once __________________ RonJames

04-30-2012, 08:34 PM	#10
jartisjr Member Join Date: Apr 2012 Posts: 2	Re: FNG here, need parts for a small pistol looking for a magazine for a fie guardian 25acp purchased in 1973

04-30-2012, 09:21 PM	#11
RJay Advanced Senior Member Join Date: Feb 2004 Location: Arizona Posts: 3,487	Re: FNG here, need parts for a small pistol Try http://www.gun-parts.com __________________ RonJames