|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
has Problems. I set up a 25 yard target and firing Winchester White box 230gr HB. I fired the first clip on a 100 yard sight in target.... NO hits???
My son was with me and said that all of the rounds went into the bottom of the target board, I was shooting with a rest. Well I loaded another mag and put the 8 rounds in to the same place... Checked the fired rounds and every primer was struck about 1/16" to 3/32" out of center. Field stripped the Taurus and checked the assembly (I had already cleaned the factory grease,and inspected assembly prior to firing.) everything was assembled correctly. Loaded and shot another mag and exact same outcome. 16" to 18" low. Also fired some Federal Hydra-shock with the same impact point. (My son complemented me on my groups, Said "Dad if you hold center mass that Perp would have no Junk left.." ) All of the expended rounds had the firing pin dent out of center of the primer. Loaded up my Dads Ithaca 1911 and fired 7 rounds into the target and they were all 1" above the target center about 3" group. The Taurus is on the way back to them for repair. No jams or FTF. Nice Trigger. The gun shop that sold me the gun is handling the return. I am Dissapointed. We will see what Taurus does. The shop has a Remington R1 for $699.00 ![]()
-->
Last edited by glens67; 04-24-2012 at 11:38 PM.. |
|
|
|
|
|
#2 |
|
V.I.P. Member
Join Date: Apr 2012
Location: Ioea
Posts: 237
|
Ehat is that strange trigger in the Ithaca?
|
|
|
|
|
|
#3 |
|
Advanced Senior Member
Join Date: May 2007
Location: Upstate NY
Posts: 2,853
|
Good luck. Hope it comes back and functions flawlessly. Nothing more aggravating than having something brand new NOT do the simplest of tasks.
__________________
The beauty of the second amendment is that it will not be needed until they try to take it." - Thomas Jefferson RESISTANCE IS FEUDAL... PREPARE TO SERVE. Last edited by graehaven; 04-25-2012 at 06:30 AM.. |
|
|
|
|
|
#4 |
|
Advanced Senior Member
Join Date: Jun 2011
Location: Mississippi
Posts: 1,334
|
Taurus should take care of it for you, let us know . That ithaca has the longest trigger I have ever seen
__________________
And I saw heaven opened, and behold a white horse; and he that sat upon him was called Faithful and True, and in righteousness he doth judge and make war. Revelation 19:11 |
|
|
|
|
|
#5 |
|
*TFF Moderator/Host*
Join Date: Jul 2009
Location: North Florida
Contributor
Posts: 8,075
|
The remington R1 for 699.00 is kinda high. Also, I have a taurus 1911 and it is a real shooter. I wouldnt give up. I sure dont get what your problem is. I have never heard of anything like it before.
__________________
I own a bunch of scary guns. You want em? Come and take em..... Liberalism is a serious, non curable, mental disorder... NRA LIFE MEMBER Oath Keepers Member NRA Certified Instructor 30 Yr CC permit holder. Last edited by Double D; 04-25-2012 at 09:19 AM.. |
|
|
|
|
|
#6 |
|
*TFF Moderator/Host*
Join Date: Jul 2008
Location: DAV, Deep in the Pineywoods of East Texas, just west of Shreveport, LA
Contributor
Posts: 11,264
|
I have a Taurus PT58 that shoots low, but not that low! That's just crazy! I'm looking forward to finding out what Taurus will do for you.
__________________
Y'all be safe now, ya hear!Lamentations Chapter 5: 1. Remember, O LORD, what is come upon us: consider, and behold our reproach. 2. Our inheritance is turned to strangers, our houses to aliens. 3. We are orphans and fatherless, our mothers [are] as widows. 5. Our necks [are] under persecution: we labour, [and] have no rest. 16. The crown is fallen [from] our head: woe unto us, that we have sinned! 21. Turn thou us unto thee, O LORD, and we shall be turned; renew our days as of old. |
|
|
|
|
|
#7 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
Both my Dad and I have long fingers. He had the Divisional Armorer modify the trigger for him. Done around 1943. It is actually very confortable to shoot.
__________________
The fish is rotting from the head down—all is not well at the top of the political hierarchy. "The difference between genius and stupidity is that genius has its limits." Albert Einstein There is nothing more dangerous than a fanatic moron. Many problems we face today are there because people who work for a living are now outnumbered by those who vote for a living. Molon Labe μολὼν λαβέ A Deo victoria Glen
|
|
|
|
|
|
#8 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
![]()
__________________
The fish is rotting from the head down—all is not well at the top of the political hierarchy. "The difference between genius and stupidity is that genius has its limits." Albert Einstein There is nothing more dangerous than a fanatic moron. Many problems we face today are there because people who work for a living are now outnumbered by those who vote for a living. Molon Labe μολὼν λαβέ A Deo victoria Glen
|
|
|
|
|
|
#9 |
|
Advanced Senior Member
Join Date: Nov 2008
Location: Akron, Ohio
Contributor
Posts: 4,720
|
How would the strikes being off center effect accuracy? No elevation adjustment on those sights?
__________________
"Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, Almighty God! I know not what course others may take; but as for me, give me liberty, or give me death!"
|
|
|
|
|
|
#10 |
|
*TFF Moderator/Host*
Join Date: Jul 2009
Location: North Florida
Contributor
Posts: 8,075
|
Yea but 16-18" low? Thats not a sight adjustment, thats just crazy.
__________________
I own a bunch of scary guns. You want em? Come and take em..... Liberalism is a serious, non curable, mental disorder... NRA LIFE MEMBER Oath Keepers Member NRA Certified Instructor 30 Yr CC permit holder. |
|
|
|
|
|
#11 |
|
Advanced Senior Member
Join Date: Nov 2008
Location: Akron, Ohio
Contributor
Posts: 4,720
|
Oh chit...I went back and reread the OP. I thought he said he was shooting @ 100 yds.
![]()
__________________
"Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, Almighty God! I know not what course others may take; but as for me, give me liberty, or give me death!"
|
|
|
|
|
|
#12 | |
|
Advanced Senior Member
Join Date: May 2007
Location: Upstate NY
Posts: 2,853
|
Quote:
And I thought it was just me, but Dan, I think you are right to on the R1. I thought mine was shooting a mite high.
__________________
The beauty of the second amendment is that it will not be needed until they try to take it." - Thomas Jefferson RESISTANCE IS FEUDAL... PREPARE TO SERVE. |
|
|
|
|
|
|
#13 |
|
*TFF Moderator/Host*
Join Date: Jul 2009
Location: North Florida
Contributor
Posts: 8,075
|
I was just talking to Sam and we talked about this. He was saying he has had one to shoot 8" low and I have had one shoot 5" low and the sights could be adjusted or cut down to make up for the difference. But, 18" low sounds like a barrel problem or something of that nature to me. Please do not mistake me for an expert, I am not an expert and have never claimed to be and never will claim to be. So, some of you experts can chime in here and set me straight if you wish. I have NEVER seen a sight problem lead to an 18" off target problem at that distance. But, there is always a first time.
__________________
I own a bunch of scary guns. You want em? Come and take em..... Liberalism is a serious, non curable, mental disorder... NRA LIFE MEMBER Oath Keepers Member NRA Certified Instructor 30 Yr CC permit holder. |
|
|
|
|
|
#14 |
|
*Administrator*
Join Date: Feb 2001
Contributor
Posts: 8,753
|
Strange indeed. I would have done the "long link - short link" test. Then made sure the barrel lugs and hood were fitting the slide properly. Next would be to inspect the barrel crown for damage or inconsistency. Then I would have measured the front sight height.
Those primer strikes aren't that far off center but they should be centered with a properly fitted barrel. I'm sure Taurus will take care of the problem. Be sure to let us know what was going on with your 1911. |
|
|
|
|
|
#15 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
Well I would have played around with it, but brand new, I want it fixed. Taurus may have more out there. If the lock up allowed the rear of the barrel to set high then every thing is down hill.
__________________
The fish is rotting from the head down—all is not well at the top of the political hierarchy. "The difference between genius and stupidity is that genius has its limits." Albert Einstein There is nothing more dangerous than a fanatic moron. Many problems we face today are there because people who work for a living are now outnumbered by those who vote for a living. Molon Labe μολὼν λαβέ A Deo victoria Glen
|
|
|
|
|
|
#16 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
It's been 3 weeks and Taurus still hasn't started the repair on it.... I want my gun...
__________________
The fish is rotting from the head down—all is not well at the top of the political hierarchy. "The difference between genius and stupidity is that genius has its limits." Albert Einstein There is nothing more dangerous than a fanatic moron. Many problems we face today are there because people who work for a living are now outnumbered by those who vote for a living. Molon Labe μολὼν λαβέ A Deo victoria Glen
|
|
|
|
|
|
#17 |
|
Senior Member
Join Date: Dec 2011
Location: Martin, Tn
Contributor
Posts: 501
|
|
|
|
|
|
|
#18 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
Just recieved the 1911 back. I AM PISSED OFF.
They replaced the slide and said that the accuracy was contributed to a weak groove. They also included a target to verify accuracy 3" group at 25 yards. Now what pissed me off. This is was a brand new pistol, no scratches, no mars, or dings. This is what I got back (pictures). I'm not anal or a prima donna, BUT my Dad taught me respect and appreciation for fire arms, (I have the knots still on my head, and I'm 60 years old,) and how to dissasemble a 1911 with out scratching the slide lock on the frame . Nothing pisses me off like seeing this. ![]() The slide is scratched and mared ![]() ![]() ![]() ![]() ![]() I will be making a phone call to Taurus tomorrow and I going up the ladder till I get satisfaction. I am still pissed... I don't mind honest ware and story marks, but flat out disrespect for a new firearm is unforgivable. ![]() ![]()
__________________
The fish is rotting from the head down—all is not well at the top of the political hierarchy. "The difference between genius and stupidity is that genius has its limits." Albert Einstein There is nothing more dangerous than a fanatic moron. Many problems we face today are there because people who work for a living are now outnumbered by those who vote for a living. Molon Labe μολὼν λαβέ A Deo victoria Glen
Last edited by glens67; 05-17-2012 at 06:43 PM.. |
|
|
|
|
|
#19 |
|
Former Guest
Join Date: Apr 2012
Posts: 43
|
Good luck. I wrote the CEO of Taurus a letter about his company's inability to repair my mil pro 145. Four trips to Taurus and the thing still would not feed a full mag. I got no reply. They really don't care. Will never buy another Taurus product!
|
|
|
|
|
|
#20 |
|
Advanced Senior Member
Join Date: Feb 2010
Location: Oklahoma, USA
Contributor
Posts: 1,771
|
I don't blame you for being pissed! That's just pure laziness and disrespect. How long does it take to lay a rag under it? Looks like someone thought about as much of your pistol as an old piece of pipe.
__________________
Stand and Fight |
|
|
|
|
|
#21 |
|
*TFF Moderator/Host*
Join Date: Jul 2009
Location: North Florida
Contributor
Posts: 8,075
|
That really is unacceptable.
__________________
I own a bunch of scary guns. You want em? Come and take em..... Liberalism is a serious, non curable, mental disorder... NRA LIFE MEMBER Oath Keepers Member NRA Certified Instructor 30 Yr CC permit holder. |
|
|
|
|
|
#22 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
Well a little digging and I found the e-mail address of the President of Taurus Mark Kresser. If the phone call does not go well then he will get a nasty gram
__________________
The fish is rotting from the head down—all is not well at the top of the political hierarchy. "The difference between genius and stupidity is that genius has its limits." Albert Einstein There is nothing more dangerous than a fanatic moron. Many problems we face today are there because people who work for a living are now outnumbered by those who vote for a living. Molon Labe μολὼν λαβέ A Deo victoria Glen
|
|
|
|
|
|
#23 |
|
Advanced Senior Member
Join Date: Nov 2009
Posts: 4,064
|
Geez that's bad. I would want a new pistol.
__________________
Samuel Adams once said, "among the natural rights of the colonists are these: first, a right to life, secondly to liberty, thirdly to property; together with the right to defend them in the best manner they can." |
|
|
|
|
|
#24 |
|
V.I.P. Member
Join Date: Mar 2008
Location: Lilburn, Ga
Posts: 100
|
That is really a shame. No firearm that goes to a factory should come back looking worse than when they went in. I have seen a lot of Ruger guys on RFC say their Ruger semiautos or single sixes went in for "whatever" and came back looking brand new. I have never had to send a weapon back, but I have good service on parts and things from a couple of the other old time firms.
I have an R1 (Remington) that was shooting about 6 inches low at 25 yards, as has been reported, but I tightened my grip and tried to watch my sight picture and had the last group about 2 inches low and 3-4 inches in diameter. I thought that was outstanding for the first time shootina a .45 and the first time to the range with it. See the last 5-6 holes right at 6 o:clock. [IMG] [/IMG][IMG] [/IMG]I hope you get a new weapon back. From a WAG point of view, I would bet your barrel bushing was out of round.
__________________
Hunters & Anglers are still the best environmentalists. Dragonfly
|
|
|
|
|
|
#25 |
|
Senior Member
Join Date: Dec 2010
Location: Middleton, ID
Contributor
Posts: 951
|
From a WAG point of view, I would bet your barrel bushing was out of round.
__________________ Nope It was the slide which they replaced something about the locking grooves not right.
__________________
The fish is rotting from the head down—all is not well at the top of the political hierarchy. "The difference between genius and stupidity is that genius has its limits." Albert Einstein There is nothing more dangerous than a fanatic moron. Many problems we face today are there because people who work for a living are now outnumbered by those who vote for a living. Molon Labe μολὼν λαβέ A Deo victoria Glen
|
|
|
|
![]() |
| Thread Tools | |
|
|