Old Stevens 22 bolt removal - Page 2 - The Firearms Forum

TRAPMAN481 · 08-10-2012, 06:13 PM

I do some gunsmithing: You probably have a Model 066 or 66. No Model markings on gun. -Drive pins out left to right-
1. Make sure gun unloaded (elementary)
2. Remove pin holding trigger mech. The trigger keeps bolt from screwing out.
3. Drive pin out of kurled cocking piece(You can remove bolt without removing this pin but will need to be removed to reassemble firing pin spring assem. with out damaging)
4. Remove the pin that goes thru bolt holding firing pin spring assembly in. Firing pin and spring will come out.
5. Insert pin or drift thu the bolt and turn counterclockwise and screw bolt
out of magazine carrier.

I hope this helps

08-10-2012, 06:13 PM	#26
TRAPMAN481 Member Join Date: Aug 2012 Location: NW Arkansas Posts: 1	Re: Old Stevens 22 bolt removal I do some gunsmithing: You probably have a Model 066 or 66. No Model markings on gun. -Drive pins out left to right- 1. Make sure gun unloaded (elementary) 2. Remove pin holding trigger mech. The trigger keeps bolt from screwing out. 3. Drive pin out of kurled cocking piece(You can remove bolt without removing this pin but will need to be removed to reassemble firing pin spring assem. with out damaging) 4. Remove the pin that goes thru bolt holding firing pin spring assembly in. Firing pin and spring will come out. 5. Insert pin or drift thu the bolt and turn counterclockwise and screw bolt out of magazine carrier. I hope this helps