Desperately Looking For An M48 Yugo Firing Pin And Spring - The Firearms Forum

gandog56 · 09-13-2012, 03:02 PM

I recently got a Yugo M48 for real cheap, but apparently the former owner put in a K98 firing pin and spring, and it's too long. I just spent 3 hours on the Internet looking for the parts, but they are either all sold out, or just don't have them. I looked at all the obvious places, like Numrich, TGP, buymilsurp. All sold out. I even went to all the online gun seller auction places, no joy. Does anybody know of any place that has them in stock, or possible have an extra they might sell me from their parts stashes?

WHSmithIV · 09-13-2012, 04:23 PM

You can try sending a message to MiGa Gun Parts in Midway Ga. If you message me I'll send you their e-mail. I've had success getting some unusual parts from them.

gandog56 · 09-13-2012, 07:34 PM

I got them. They have a web site. Didn't see one listed but they had a contact thingie there and I used it. Doesn't look too good though, still searching.

gandog56 · 09-15-2012, 03:07 AM

They said no got.

jack404 · 09-15-2012, 03:13 AM

http://www.hoosiergunworks.com/catalog/mausers.html

https://www.buymilsurp.com/m48-yugo-...ng-p-3894.html

.

gandog56 · 09-16-2012, 06:59 PM

Quote:

Originally Posted by jack404

http://www.hoosiergunworks.com/catalog/mausers.html

https://www.buymilsurp.com/m48-yugo-...ng-p-3894.html

.

Neither has them, still looking.

WHSmithIV · 09-17-2012, 01:23 AM

hmm - if all else fails, take your old one to a local mom&pop machine shop that does CNC machining and ask them how much they'd charge to make you one.

CHW2021 · 09-17-2012, 04:47 PM

I can help you out somewhat.... I have a bolt and spring BUT a broken firing pin.
PM me and discuss.

gandog56 · 09-17-2012, 07:09 PM

Quote:

Originally Posted by CHW2021

I can help you out somewhat.... I have a bolt and spring BUT a broken firing pin.
PM me and discuss.

It's the firing pin I need though. You can just cut some coils off the spring to make it right.

09-13-2012, 03:02 PM	#1
gandog56 V.I.P. Member Join Date: May 2008 Location: Mobile AL. Posts: 325	Desperately Looking For An M48 Yugo Firing Pin And Spring I recently got a Yugo M48 for real cheap, but apparently the former owner put in a K98 firing pin and spring, and it's too long. I just spent 3 hours on the Internet looking for the parts, but they are either all sold out, or just don't have them. I looked at all the obvious places, like Numrich, TGP, buymilsurp. All sold out. I even went to all the online gun seller auction places, no joy. Does anybody know of any place that has them in stock, or possible have an extra they might sell me from their parts stashes? -->

09-13-2012, 04:23 PM	#2
WHSmithIV Advanced Senior Member Join Date: May 2012 Location: Moore, Idaho contributor Posts: 2,624	Re: Desperately Looking For An M48 Yugo Firing Pin And Spring You can try sending a message to MiGa Gun Parts in Midway Ga. If you message me I'll send you their e-mail. I've had success getting some unusual parts from them.

09-13-2012, 07:34 PM	#3
gandog56 V.I.P. Member Join Date: May 2008 Location: Mobile AL. Posts: 325	Re: Desperately Looking For An M48 Yugo Firing Pin And Spring I got them. They have a web site. Didn't see one listed but they had a contact thingie there and I used it. Doesn't look too good though, still searching.

09-15-2012, 03:07 AM	#4
gandog56 V.I.P. Member Join Date: May 2008 Location: Mobile AL. Posts: 325	Re: Desperately Looking For An M48 Yugo Firing Pin And Spring They said no got.

09-15-2012, 03:13 AM	#5
jack404 Former Guest Join Date: Jan 2010 Location: Australia Contributor Posts: 17,622	Re: Desperately Looking For An M48 Yugo Firing Pin And Spring http://www.hoosiergunworks.com/catalog/mausers.html https://www.buymilsurp.com/m48-yugo-...ng-p-3894.html .

09-17-2012, 01:23 AM	#7
WHSmithIV Advanced Senior Member Join Date: May 2012 Location: Moore, Idaho contributor Posts: 2,624	Re: Desperately Looking For An M48 Yugo Firing Pin And Spring hmm - if all else fails, take your old one to a local mom&pop machine shop that does CNC machining and ask them how much they'd charge to make you one.

09-17-2012, 04:47 PM	#8
CHW2021 V.I.P. Member Join Date: Feb 2009 Location: Louisiana Posts: 467	Re: Desperately Looking For An M48 Yugo Firing Pin And Spring I can help you out somewhat.... I have a bolt and spring BUT a broken firing pin. PM me and discuss.