Re: May have saved some $
I ordered the Redding G-Rx Die from Midsouth for about $36. I does a great job at removing the glock bulge from the brass. I just double checked the price at Midsouth and they now have it for $29.51, but I also noticed Redding is now making a carbide G-Rx die which is $58.66 at Midsouth. Also checked Midway, the $69.99 die you saw was the carbide one, they also offer the original one for $36.99. Had I known that a carbide die was coming out I would have held off with the steel one and ordered the carbine one. Right now with the steel one, I lube the cases before sizing them with the G-Rx die, then retumble them for about 20 minutes before I run the cases through the normal sizing die.