The CZ52 and the Glock holster connection. I got lucky. - The Firearms Forum

Remington597 · 08-07-2004, 12:31 PM

I have three CZ52's in 7.62x25TOK . It is by far my favorite pistol. I don't think there is anything better for the money. I've always had problems finding the right holsters. Well, I was visiting my favorite gun shop and he had alot of accessories for me to go through.
So I finally got lucky, it didn't just fit good, It was a PERFECT fit.
I am using the Gould & Goodrich 29L-226. brown leather holster. It was intended for a Glock 17 or even a 19 fits ok, but the CZ is a PERFECT fit.
Simply a great relief to finally find a perfect fit. Sometimes I get frustrated and can't get the right holster. It has to fit perfect, so I give up sometimes and just get a pouch type holster or even a special waffle foam pistol box with a lock, but this is my lucky day. I not only got three boxes of 7.62x25TOK ammo for a good price, but I got the leather holsters for my CZs as well. What a great day. Here are the photos.

SouthernMoss · 08-07-2004, 01:01 PM

That's great, Remmy!

Remington597 · 08-07-2004, 01:26 PM

somo:
The gunsmith who I go to is a dear friend of mine , he owns the gun shop in Clearwater , FL.
He teases me sometimes and tells me I am nuts. He'll find a holster for me for some obscure pistol and I will bring the pistol in and try to fit it inside.
It fits but has a little wiggle room ,so its not a perfect fit because it wasn't meant for that specific pistol.
He'll say: " You've got very little wiggle room in there, but its just a hair off and it wiggles a bit."
I'll say: "I don't want ANY wiggle room. I want it to fit perfectly"
So today, we had fun, when I bought these that he got in ,since they fit PEFECTLY for the CZs, he said " You owe me big time for being a pain in the a$$, you come in and you don't even bring donuts.! :

"
So I went down the street to Dunkin Donuts, only a few blocks away. Great place for a gun shop since if it is ever robbed or attacked, there would be about fifty cruisers there in 30 seconds.

So I brought him three boxes of donuts for him and the customers in there.
I said. " Thats for next time I 'm going to be a pain in the a$$"
Its a good day.

SouthernMoss · 08-07-2004, 01:59 PM

So where are OUR donuts??

Remington597 · 08-07-2004, 04:33 PM

They are hiding in njretcop's signature line!

,but seriously it would be nice to meet some folks around here and I look forward to it one day. It should be fun. Any one heading to West Central Florida, should drop me a message.

glocknut · 08-07-2004, 07:06 PM

As far as Glocks go, sidearmor holsters are hard to beat. A perfect fit because they are made from kydex or something that is molded to the shape of the pistol. You have to state your model when ordering.

mike
gn

Remington597 · 08-08-2004, 01:11 AM

http://michaels-oregon.com/adtemplat...catky2=7357446

I went to the Michaels of Oregon website and found the above? Do you think it will fit a CZ52 also? Its always good to have addittional holsters.

TRAP55 · 08-08-2004, 02:23 PM

Uncle Mikes makes a nice Cordura nylon thumb break for the small and medium frame semi-autos. You can't find better customer service either. Their CS rep., Linda(?), goes out of her way to make happy customers.

Remington597 · 08-08-2004, 06:16 PM

Thanks, Uncle Mike's has excellent products. I've dealt with them before, I will ask for Linda specifically.

Hydra Shok · 08-09-2004, 06:12 PM

Quote:

He teases me sometimes and tells me I am nuts.

So we ain't the only ones??

Remington597 · 08-09-2004, 06:33 PM

Far from it my friend, I already know that I've flipped my lid

. This gun dealer is a dear friend, we kid around alot. He has alot of law enforcement customers and he has on going bets with them that he will clean their Glocks and Kel Tecs for free if they bring them well group bullseyes. He gets alot of them PAYING for the cleanings. Alot of them are just plain lazy and have kids and family and don't have the time or the will to clean them, its not like cleaning a Glock is rocket science

08-07-2004, 12:31 PM	#1
Remington597 Former Guest Join Date: Feb 2004 Posts: 3,201	The CZ52 and the Glock holster connection. I got lucky. I have three CZ52's in 7.62x25TOK . It is by far my favorite pistol. I don't think there is anything better for the money. I've always had problems finding the right holsters. Well, I was visiting my favorite gun shop and he had alot of accessories for me to go through. So I finally got lucky, it didn't just fit good, It was a PERFECT fit. I am using the Gould & Goodrich 29L-226. brown leather holster. It was intended for a Glock 17 or even a 19 fits ok, but the CZ is a PERFECT fit. Simply a great relief to finally find a perfect fit. Sometimes I get frustrated and can't get the right holster. It has to fit perfect, so I give up sometimes and just get a pouch type holster or even a special waffle foam pistol box with a lock, but this is my lucky day. I not only got three boxes of 7.62x25TOK ammo for a good price, but I got the leather holsters for my CZs as well. What a great day. Here are the photos. --> Last edited by Remington597; 08-07-2004 at 12:33 PM..

08-07-2004, 01:01 PM	#2
SouthernMoss Admin Tech Staff Join Date: Jan 2003 Location: SW MS Contributor Posts: 10,651	Re: The CZ52 and the Glock holster connection. I got lucky. That's great, Remmy! __________________ My Second protects your First "I declare to you that woman must not depend upon the protection of man, but must be taught to protect herself, and there I take my stand." - Susan B Anthony

08-07-2004, 01:26 PM	#3
Remington597 Former Guest Join Date: Feb 2004 Posts: 3,201	Re: The CZ52 and the Glock holster connection. I got lucky. somo: The gunsmith who I go to is a dear friend of mine , he owns the gun shop in Clearwater , FL. He teases me sometimes and tells me I am nuts. He'll find a holster for me for some obscure pistol and I will bring the pistol in and try to fit it inside. It fits but has a little wiggle room ,so its not a perfect fit because it wasn't meant for that specific pistol. He'll say: " You've got very little wiggle room in there, but its just a hair off and it wiggles a bit." I'll say: "I don't want ANY wiggle room. I want it to fit perfectly" So today, we had fun, when I bought these that he got in ,since they fit PEFECTLY for the CZs, he said " You owe me big time for being a pain in the a$$, you come in and you don't even bring donuts.! : " So I went down the street to Dunkin Donuts, only a few blocks away. Great place for a gun shop since if it is ever robbed or attacked, there would be about fifty cruisers there in 30 seconds. So I brought him three boxes of donuts for him and the customers in there. I said. " Thats for next time I 'm going to be a pain in the a$$" Its a good day.

08-07-2004, 01:59 PM	#4
SouthernMoss Admin Tech Staff Join Date: Jan 2003 Location: SW MS Contributor Posts: 10,651	Re: The CZ52 and the Glock holster connection. I got lucky. So where are OUR donuts?? __________________ My Second protects your First "I declare to you that woman must not depend upon the protection of man, but must be taught to protect herself, and there I take my stand." - Susan B Anthony

08-07-2004, 04:33 PM	#5
Remington597 Former Guest Join Date: Feb 2004 Posts: 3,201	Re: The CZ52 and the Glock holster connection. I got lucky. They are hiding in njretcop's signature line! ,but seriously it would be nice to meet some folks around here and I look forward to it one day. It should be fun. Any one heading to West Central Florida, should drop me a message.

08-07-2004, 07:06 PM	#6
glocknut Advanced Senior Member Join Date: Dec 2003 Location: THE FORUM MASCOTT... Posts: 12,482	Re: The CZ52 and the Glock holster connection. I got lucky. As far as Glocks go, sidearmor holsters are hard to beat. A perfect fit because they are made from kydex or something that is molded to the shape of the pistol. You have to state your model when ordering. mike gn __________________ Where O where are you tonight? Why have you gone and left me alone? I searched to world over and a thought i found true love... You met another and PTThhh you were gone....

08-08-2004, 01:11 AM	#7
Remington597 Former Guest Join Date: Feb 2004 Posts: 3,201	Re: The CZ52 and the Glock holster connection. I got lucky. http://michaels-oregon.com/adtemplat...catky2=7357446 I went to the Michaels of Oregon website and found the above? Do you think it will fit a CZ52 also? Its always good to have addittional holsters.

08-08-2004, 02:23 PM	#8
TRAP55 Advanced Senior Member Join Date: May 2004 Location: Occupied Territory Of Kalifornia Posts: 1,834	Re: The CZ52 and the Glock holster connection. I got lucky. Uncle Mikes makes a nice Cordura nylon thumb break for the small and medium frame semi-autos. You can't find better customer service either. Their CS rep., Linda(?), goes out of her way to make happy customers. __________________ Aim small...Miss small www.mausercentral.com/forum

08-08-2004, 06:16 PM	#9
Remington597 Former Guest Join Date: Feb 2004 Posts: 3,201	Re: The CZ52 and the Glock holster connection. I got lucky. Thanks, Uncle Mike's has excellent products. I've dealt with them before, I will ask for Linda specifically.

08-09-2004, 06:33 PM	#11
Remington597 Former Guest Join Date: Feb 2004 Posts: 3,201	Re: The CZ52 and the Glock holster connection. I got lucky. Far from it my friend, I already know that I've flipped my lid . This gun dealer is a dear friend, we kid around alot. He has alot of law enforcement customers and he has on going bets with them that he will clean their Glocks and Kel Tecs for free if they bring them well group bullseyes. He gets alot of them PAYING for the cleanings. Alot of them are just plain lazy and have kids and family and don't have the time or the will to clean them, its not like cleaning a Glock is rocket science