|
|
|
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
03-12-2012, 07:44 PM
|
#1 |
|
Member
Join Date: Mar 2012
Location: Newport , Ohio
Posts: 6
|
ruger 22/45
where can i find grips to fit a ruger mkIII 22/45 with fixed grips
|
|
|
|
03-12-2012, 10:22 PM
|
#2 |
|
*TFF Moderator/Host*
Join Date: Apr 2009
Location: Imperial, MO
Posts: 3,671
|
Re: ruger 22/45
Well you kinda answered your own question, fixed grips are not replaceable. Your stuck with what you got unless you use a wrap around rubber grip for a 1911. The 22/45 has the same grip frame as a 1911 but you would have to tap the frame for grip bushings for a 1911. You will destroy the value of the gun. You also have to be careful to not install them too close to the sear pin.
__________________
Only cowards shoot with their eyes closed.... helixgunsmith.com |
|
|
|
|
03-17-2012, 02:59 PM
|
#3 |
|
V.I.P. Member
Join Date: Dec 2011
Location: PNW
Posts: 62
|
Re: ruger 22/45
If you have the non-removable grip model you have three choices
1. Slip on grip glove by Hogue http://www.hoguestore.com/index.php?...roducts_id=146 2. Custom made grips that fit over and around your built in grips made by Dominic.Notaro@csinet.net 3. Grind off your built in grips and install 1911 grip bushings or have someone do it for you. http://www.rimfirecentral.com/forums...d.php?t=380699 I tried #2 and then did #3 to my 22/45 and it made a huge improvement in the grip and handling. |
|
|
|
 |
| Thread Tools | |
|
|
