The Firearms Forum - Gun Community  
TheFirearmsForum.com
FOUNDED: February 9, 2001
If you prefer to make a donation by check,
send an email to Support for the mailing address.

Go Back   The Firearms Forum - Gun Community > Technical Information > The Ask the Pros & What's It Worth? Forum

Notices


Reply
 
Thread Tools
Old 05-05-2012, 12:53 PM   #1
mojoe59
Member
 
Join Date: May 2012
Posts: 2
Default 3 drillings

I have three drillings that I am looking to sell and am trying to find out what the value of them are.
#1 Can't find maker. Underside of barrels marked flussstahl Krupp Essen
Under rifle barrel marked Gussstahl Kruoo Essen
Ser. # 1346 16x16x8.7mm
numerous stamps incl. nitro Lt. engraving.
#2 Josef Wirnhier pe Arrkirchen
16x16x9.3mm also numerous proof marks alond with 4.23 333
Very heavy deep engraving receiver is polished silver/ nickel/?
Fantastic stock wood w/ cartridge holder on bottom of stock Action is side release
#3 Miiler & Val Greiss in Munchen
16x16x ? Barrel marked 470 Barrel is very large bore.
Ser.# 20738 Very heavy deep endraving
On top of stock is silver ilay in shape of a crest. On side of stock is silver inlaid emblem. center of emblem is a crown and below are letters interwoven. tough to make out because of fancy scrolling. Engraved into edge of silver emblem is the following--- Jhrem leiben Julius Grafen Zech seine Kameraden im 2 Jufanterie Regiment Kron Pruix.
Gun is a work of art. old and untouched release if from lever wrapped around trigger guard.
All three guns are hammer guns, all in great condition

What are they worth?

-->
mojoe59 is offline   Reply With Quote
Old 05-05-2012, 06:59 PM   #2
Hammerslagger
Advanced Senior Member
 
Join Date: Jul 2009
Posts: 1,099
Default Re: 3 drillings

Detailed, clear pictures including all markings would greatly help others to help you.
Hammerslagger is offline   Reply With Quote
Old 05-06-2012, 12:38 PM   #3
wonderwhippet
Advanced Senior Member
 
Join Date: Jan 2003
Posts: 1,599
Default Re: 3 drillings

Can't say much about the drillings without pictures. However, a general rule is that hammerless drillings can be quite pricey, but with exposed hammers the value is fairly low.
wonderwhippet is offline   Reply With Quote
Old 05-06-2012, 12:48 PM   #4
Skipper
V.I.P. Member
 
Skipper's Avatar
 
Join Date: Jul 2008
Location: People's Republic of Kalifornia
Posts: 345
Default Re: 3 drillings

mojoe, see what these guys say, also. They love doubles and drillings:

http://forums.accuratereloading.com/eve

Specifically:

http://forums.accuratereloading.com/...rm/f/760101804

http://forums.accuratereloading.com/...rm/f/335105333

http://forums.accuratereloading.com/.../frm/f/2711043
Skipper is offline   Reply With Quote
Old 05-06-2012, 06:57 PM   #5
mojoe59
Member
 
Join Date: May 2012
Posts: 2
Default Re: 3 drillings

Quote:
Originally Posted by mojoe59 View Post
I have three drillings that I am looking to sell and am trying to find out what the value of them are.
#1 Can't find maker. Underside of barrels marked flussstahl Krupp Essen
Under rifle barrel marked Gussstahl Kruoo Essen
Ser. # 1346 16x16x8.7mm
numerous stamps incl. nitro Lt. engraving.
#2 Josef Wirnhier pe Arrkirchen
16x16x9.3mm also numerous proof marks alond with 4.23 333
Very heavy deep engraving receiver is polished silver/ nickel/?
Fantastic stock wood w/ cartridge holder on bottom of stock Action is side release
#3 Miiler & Val Greiss in Munchen
16x16x ? Barrel marked 470 Barrel is very large bore.
Ser.# 20738 Very heavy deep endraving
On top of stock is silver ilay in shape of a crest. On side of stock is silver inlaid emblem. center of emblem is a crown and below are letters interwoven. tough to make out because of fancy scrolling. Engraved into edge of silver emblem is the following--- Jhrem leiben Julius Grafen Zech seine Kameraden im 2 Jufanterie Regiment Kron Pruix.
Gun is a work of art. old and untouched release if from lever wrapped around trigger guard.
All three guns are hammer guns, all in great condition

What are they worth?
mojoe59 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:18 PM.

STILL SEARCHING FOR SOMETHING? TRY THE TFF "GOOGLE" SEARCH ENGINE BELOW!
Google

Copyright ©2002 - 2013, TheFirearmsForum.Com