iver johnson

[t300]

need help this belonged to my dads great grandmother 3 in barrel on top iver johnson arms and cycle works fitchburg mass usa looks to be nickel or crome plated patd apr6.86 feb 15 may10 87 mar 13 86 a 25.96 pats pending bottom of grip inside left grip panel k 30799 bottom trigger guard 30799 its in bad shape the numbers look right the best i could tell any info thanks alot and maybe where to get parts or someone to work on it dad thinks it is a 32?

[b.goforth]

serial number K 30799 was manufactured in 1904. i can't help with who to work on it but somw parts are availble form www.e-gunparts.com

SECOND MODEL SAFETY AUTOMATIC HAMMER REVOLVER
(Black Powder Cartridges)------------1896-1908
LARGE FRAME AND SMALL FRAME VERSIONS USES HAMMER THE HAMMER ACTION: Double top post barrel latch, nickel finish standard, blue optional, hard rubber grip panels with Owls head at top. Hammer the Hammer action, two frame sizes, and three calibers. Standard barrel length: small frame 3 inches, large frame 3 ¼ inches; Calibers: small frame .22 rimfire 7 rounds cylinder capacity, .32 centerfire 5 rounds cylinder capacity, large frame .38 centerfire 5 rounds cylinder capacity; Weight: small frame with 3 inch barrel .22 rimfire 12 ounces, .32 centerfire 12 ¼ ounces, large frame with 3 ¼ inch barrel 17¼ ounces; Frame height: small frame 3 ¼ inches, large frame 3 7/8 inches; Frame length: small frame 4 3/26 inches, large frame 5 inches; Overall length: small frame with 3 inch barrel 6 3/8 inches, large frame with 3 ¼ inch barrel 7 3/8 inches. Only difference between the first and second model is the barrel latch. Main serial number location on left side of grip frame grips must be removed to see. The Second Model features a double top post barrel latch, flat leaf hammer spring and two cross pins in the lower frame.
VALUE: 100%=$275 60%=$135
For revolvers equipped with Bourne Knuckleduster add 100%

bill

[t300]

thank you for the fast reply and all the info