|
|
|
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
06-16-2003, 05:34 PM
|
#1 |
|
Member
Join Date: Mar 2003
Posts: 6
|
ruger scope
I would like to put a scope on my Super Blackhawk Bisley.
Pistol is .44 mag with 7 1/2 barrel. Any advice on mounts and scopes would be big help.  |
|
|
|
06-17-2003, 04:59 AM
|
#2 |
|
Senior Member
Join Date: Jun 2003
Location: Atlanta, GA, USA
Posts: 803
|
well what kind of mount, and does this model have a rail on it?
if it does not have a rail it will have to be drill and tapped, if it does, just screw on any standard mount.
__________________
Things n' Stuff |
|
|
|
|
06-22-2003, 08:43 AM
|
#3 |
|
Advanced Senior Member
Join Date: Jan 2002
Location: Texas
Posts: 8,897
|
I believe Weaver makes a blackhawk mount and can be had from Brownell's or MidwayUSA. If I remember correctly, part of the mount will use the screw hole from the rear sight (which will be removed) and then a few holes will need to be drilled and tapped on the top strap. As far as a pistol scope goes, any 2x from a reputable manufacturer will hold up to the 44 Mag's punishment. I would advise against a 4x due to the long eye relief of the scope and high magnification. Tried a 4x once and could not hit anything with it due to shaking. Switched to a 2x and all was fine.
What part of AZ are you from. I know several gunsmiths in the Chandler area.
__________________
|
|
|
|
 |
| Thread Tools | |
|
|
