Re: reloading woes
Don't worry it's a pretty common occurrence,unless it's cutting into the copper jacket bad it want affect accuracy just doesn't look so hot. The inside edges of the seater plug is probably just sharp and probably not designed to fit that bullet exactly right,ther usually pretty generic unless you have a custom seater plug made and if your neck tension is tight it just make it worse.
what you can try is chuck a bullet up in a cordless drill coat the bullet with lapping compound,take the seater plug out of the die insert bullet and see if you can smooth out the edges just enough to not cut into the bullet. CHECK IT FREQUENTLY.
Last edited by res45; 11-24-2009 at 10:10 PM..