|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Member
Join Date: Aug 2011
Posts: 4
|
I have this model 12 pump made in 1932. I have seen photos of these with different butt plates / pads on them. Mine has a redish color butt pad on it and seems to be professionally fitted to the gun. Is this the right pad or should it have the black buttplate with the winchester logo? Thanks alot for your help.
-->
|
|
|
|
|
|
#2 |
|
Advanced Senior Member
Join Date: Sep 2008
Posts: 1,436
|
I think all the three inch magnums came with the red pad as you are describing, but I don't know how early they made magnums. Also your gun is old enough it may have been a special order.
Ron |
|
|
|
|
|
#3 |
|
Advanced Senior Member
Join Date: Nov 2010
Posts: 1,087
|
Probably aftermarket, but if you can post a clear picture of the butt of the gun and the entire gun in general we can tell you for certain.
__________________
Full service gunsmithing and firearm manufacturing shop. Licensed FFL 07/02 Manufacturer. Visit our website! |
|
|
|
|
|
#4 |
|
Senior Member
Join Date: Mar 2006
Location: NW Louisiana
Posts: 813
|
My dads M12 circa 192? has a black plate...Mine circa 1961 is black...My 3" mag Circa 70's I owned at one time had an reddish recoil pad...
__________________
Ineptocracy (in-ep-toc'-ra-cy) - a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers. |
|
|
|
![]() |
| Thread Tools | |
|
|