Re: Boiling Gun
boiling is only really used to remove cosmoline and hardened grease that is hard to remove out of small areas such as the firing pin channel. Don't boil your gun, you only boil the parts and I would not boil the parts from a Pardner. Sound like you have some fouling or hardened grease in the pin channel and it needs to be removed. If you know how to remove the firing pin then pull it out clean it, inspect it (make sure its not broken, should have a hemisphere at the tip) clean out the pin channel, pay close attention to the pin hole area, make sure there is no build up of fouling. I think this may be your issue.