Stevens Savage 77B 20 Gauge - The Firearms Forum

Spurious · 11-17-2006, 01:00 PM

This shotgun is marked STEVENS Savage Arms Corporation, Chicopee Falls, Mass, USA MODEL 77B **

The other side says Proof Tested 20 Gauge. 2 3/4 inch chamber.

There are no markings on the receiver.

The barrel measures 25 1/4 inches from the receiver to the muzzle.

The front bead is a screw.

I assume the ** indicates the choke but I don't know if that is IC or Modified. (I don't have right tool to measure the muzzle diamater accurately). A reference book that I have says they were made with 26" barrels IC or 28" barrels in Modified or Full.

I think this may have been a 28" cut down. Opinions on that welcome.

Any clues at all on DOM? (I know it must be pre-68)

11-17-2006, 01:00 PM	#1
Spurious Member Join Date: Apr 2005 Posts: 21	Stevens Savage 77B 20 Gauge This shotgun is marked STEVENS Savage Arms Corporation, Chicopee Falls, Mass, USA MODEL 77B The other side says Proof Tested 20 Gauge. 2 3/4 inch chamber. There are no markings on the receiver. The barrel measures 25 1/4 inches from the receiver to the muzzle. The front bead is a screw. I assume the indicates the choke but I don't know if that is IC or Modified. (I don't have right tool to measure the muzzle diamater accurately). A reference book that I have says they were made with 26" barrels IC or 28" barrels in Modified or Full. I think this may have been a 28" cut down. Opinions on that welcome. Any clues at all on DOM? (I know it must be pre-68) -->