|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Member
Join Date: Aug 2009
Location: chester va
Posts: 19
|
Does anybody have a good way to get the upc off the hornady dies cases. I've tried getting it damp and using blow dryer. putting it in freezer for a while either way it won't come off without ruining it.
Thanks
-->
|
|
|
|
|
|
#2 |
|
Member
Join Date: Feb 2010
Posts: 1
|
Hairdryer for 15-20 seconds. Then carve around the UPC with a knife and peel it off. Be careful with the ink on the label until it cools so it doesn't smudge.
|
|
|
|
|
|
#3 |
|
V.I.P. Member
Join Date: Feb 2009
Posts: 340
|
I have sent mine in by using a razor blade and the paper was thin and ripped. No problem getting the bullets...they have to assume that if you have the receipt and the ripped paper, it is good enough. They put the damn thing in a bad spot anyway.
J |
|
|
|
|
|
#4 |
|
Advanced Senior Member
Join Date: Oct 2009
Location: Michigan
Posts: 1,005
|
a product called goof - off works amazing on labels.
|
|
|
|
|
|
#5 |
|
*TFF Moderator/Host*
Join Date: Feb 2007
Location: Heart Of Texas
Contributor
Posts: 17,305
|
I soaked mine with rem oil. it came right off after about 10 or 15 minutes.
__________________
It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze. The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do. Fact of life: After Monday and Tuesday, even the calendar says WTF!
|
|
|
|
|
|
#6 |
|
Advanced Senior Member
Join Date: Jul 2009
Location: naugatuck,Ct.
Contributor
Posts: 6,666
|
Goo Gone comes in a bottle u can get it at home depot great for getting sticky off or nail polish remover
|
|
|
|
|
|
#7 |
|
Member
Join Date: Aug 2009
Location: chester va
Posts: 19
|
thanks for the tips, i tried the hairdryer for about 20sec and managed to get them off. as you said not a good spot for them i was about ready to cut the plastic underneath to get at them (very frustrating)
|
|
|
|
![]() |
| Thread Tools | |
|
|