Lee cast bullet sizing die on a dillon - The Firearms Forum

extremepyro · 10-30-2009, 05:03 PM

Is there an adapter that is needed to mount as a shell plate to accept the bullet ram on a lee cast bullet ram for the sizing of cast bullets?
Im guessing this ram would normally fit on a lee press where a case holder would be.

army mp · 10-30-2009, 05:17 PM

If there is I have never seen one. most guys buy the cheap Lee C- press for about $25.00 and set it up to use with the Lee Sizing Dies.

budman46 · 11-02-2009, 04:52 AM

extremepyro,

progressive presses are great and their production rate is terrific, but they lack versatility. go with the suggestion from army mp for the lee bullet lube die; you'll also find the cheapie press great for using such things as collet bullet puller dies, primer crimp removers and lee's great case mouth expander.

i have 3 dillons and a rockchucker, but the press i use most is my lee classic cast turret. truly a jack of all trades and not too shabby on the production side of things.

budman

10-30-2009, 05:03 PM	#1
extremepyro Member Join Date: May 2009 Location: South central Pa Posts: 10	Lee cast bullet sizing die on a dillon Is there an adapter that is needed to mount as a shell plate to accept the bullet ram on a lee cast bullet ram for the sizing of cast bullets? Im guessing this ram would normally fit on a lee press where a case holder would be. -->

10-30-2009, 05:17 PM	#2
army mp V.I.P. Member Join Date: Jan 2009 Location: western Pa, Posts: 479	Re: Lee cast bullet sizing die on a dillon If there is I have never seen one. most guys buy the cheap Lee C- press for about $25.00 and set it up to use with the Lee Sizing Dies.

11-02-2009, 04:52 AM	#3
budman46 Member Join Date: Nov 2008 Posts: 29	Re: Lee cast bullet sizing die on a dillon extremepyro, progressive presses are great and their production rate is terrific, but they lack versatility. go with the suggestion from army mp for the lee bullet lube die; you'll also find the cheapie press great for using such things as collet bullet puller dies, primer crimp removers and lee's great case mouth expander. i have 3 dillons and a rockchucker, but the press i use most is my lee classic cast turret. truly a jack of all trades and not too shabby on the production side of things. budman