Re: 308 loads
Welcome aboard, sendit. If those results were mine I'd be very happy. Yours is one of the standards for accuracy, and very similar to my 1,000 yard load; I use the 175 grain SMK, Varget, Remington brass and Federal Gold Medal primers.
The first thing I would consider is case preparation. If you don't already, try these things; segregate brass for weight and consistency, make sure you deburr the inside of the flash hole, clean out the primer pocket. Also, play with bullet seating depths if you are seating close to or into the lands.
As far as your elevation adjustments, make sure you are comparing apples to apples; pay no attention to the other guy's clicks, how many minutes is he moving and from what initial range setting? Also, if you're not already doing so, start keeping a detailed data book on your rifle, ammunition and range activity.
Let not the rifles of good and free men be reforged into plowshares, but may they rest in a place of honor; ready, well oiled and God willing unused. For if the price of peace becomes licking the boots of tyrants, then "To Arms!" I say, and may the fortunes of war smile upon patriots.
Fortes Fortuna Javat
Last edited by USMC-03; 11-10-2008 at 10:25 AM..