|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Member
Join Date: Sep 2003
Location: Montana
Posts: 1
|
I have a bunch of WAAR wads and can't find data for 11/4 oz loads. I'd prefer to use Unique or clays universal or even herco since I plenty of those powders. got any suggestions?
__________________
the power of the wolf is the pack and the power of the pack is the wolf
-->
|
|
|
|
|
|
#2 |
|
Advanced Senior Member
Join Date: Jan 2002
Location: Texas
Posts: 8,897
|
Hello jstcows and welcome to TFF. I dragged out my old Lyman "Shotshell Handbook", Second edition and here is what I found. I will assume these are low brass WAA target hulls. If they are different, then this data does not apply.
Herco Powder: 26.5 gr; Winchester 209 primer, Remington RP12 wad. 27.5 gr; CCI 109 primer; One Pacific Green Verelite wad. 28.0 gr: CCI 109; Winchester WAA12R wad; Unique Powder: 22.5 gr; Winchester 209; Remington RP12 wad 22.5 gr; Winchester 209; One Pacific Blue Verelite wad. 24.0 gr; WW 209; WAA12R wad. Hope this helps. I would recommend getting a newer edition of the Lyman book and seeing what they say!
__________________
|
|
|
|
|
|
#3 |
|
Adnanced Senior Member
Posts: n/a
|
I load those red wads in 1 1/4 loads from my Lyman book. I think there are some Herco loads listed. I will check later on and let you know.
|
|
![]() |
| Thread Tools | |
|
|