|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Adnanced Senior Member
Posts: n/a
|
woodcarver
Member Posts: 8 (3/27/02 7:01:19 am) Reply | Edit | Del All hot .357 -------------------------------------------------------------------------------- Question? Were early .357 loads hotter than todays off the shelf loads. Do you have hot(but safe) .357 loads you use. Smoky14 V.I.P. Member Posts: 91 (3/27/02 10:38:29 am) Reply | Edit | Del Re: hot .357 -------------------------------------------------------------------------------- The Winchester load with 296 is HOT. loader44 V.I.P. Member Posts: 164 (3/31/02 3:44:08 pm) Reply | Edit | Del 357 loads -------------------------------------------------------------------------------- herc 2400 = 1620 fps win296 = 1560 fps blue dot = 1500 fps pretty hot stuff. all with 158gr buddets. loader44
-->
|
|
|
|
#2 |
|
Member
Join Date: Jan 2013
Posts: 42
|
What Barrel length? those loads seem way Hot! if those are out of a Handgun!
|
|
|
|
|
|
#3 |
|
Senior Member
Join Date: Feb 2010
Location: Desert Southwest Proper
Contributor
Posts: 765
|
Welcome to the forum Powder Burner, we are glad to have you
![]() ![]() ![]() Just an FYI, the thread that you responded to was originated about 10 years ago, so it's unlikely any of the original posters will respond. BUT that doesn't stop yahoos like me ![]() ![]() The hottest .357 load I have seen listed from a reputable source is 158 grain Speer Gold Dot out of a ten inch barrel, using Alliants' 300 MP powder, getting a claimed 1686 fps. Here's the data. |
|
|
|
|
|
#4 |
|
V.I.P. Member
Join Date: Sep 2009
Location: S.Al
Posts: 251
|
I have load books from 30s,+40s -believe me loads were MUCH hotter...I picked up Hornadays newest manual-.44spec-max-6.3grs Unique...I've been using Skeeters load of 7.5gr over same 240gr swc for 25 years...never a problem and will continue using it...no I don't shoot old Colts or cheap .44s...
|
|
|
|
|
|
#5 |
|
Member
Join Date: Jan 2013
Posts: 42
|
Sorry,my mistake,ive been having navigation problems on this site as you can tell.
|
|
|
|
![]() |
| Thread Tools | |
|
|