The Firearms Forum - Gun Community  
TheFirearmsForum.com
FOUNDED: February 9, 2001
If you prefer to make a donation by check,
send an email to Support for the mailing address.

Go Back   The Firearms Forum - Gun Community > Firearm-related Activities > The Ammo & Reloading Forum

Notices


Reply
 
Thread Tools
Old 01-12-2012, 02:16 PM   #1
Ron01013
Member
 
Join Date: Dec 2011
Location: MA.
Posts: 19
Default 9mm Bullet weight?

Loading 115gr and have heard I'm better off using 124gr.
why the differance?
I shoot and load for fun, paper, jugs ect:
Thanks for any info,
Ron

-->
Ron01013 is offline   Reply With Quote
Old 01-12-2012, 03:05 PM   #2
howlnmad
Advanced Senior Member
 
howlnmad's Avatar
 
Join Date: Nov 2008
Location: Harriman, Tn
Contributor
Posts: 2,573
Default Re: 9mm Bullet weight?

Don't know, all I've ever load are 115 grain.
__________________
howlnmad is offline   Reply With Quote
Old 01-12-2012, 03:10 PM   #3
todd51
Advanced Senior Member
 
todd51's Avatar
 
Join Date: Mar 2009
Location: Central, Ohio
Contributor
Posts: 2,575
Default Re: 9mm Bullet weight?

I switched because some of my 9mm pistols and those of some of the other Old Guys were hitting below the point of aim. JLA one of the local forum experts suggested that I move up to the 124 grain from 115 as it would probably print higher. He was 100% right and they now hit at point of aim. For serious social work I am loaded with 147 gr.
__________________
Retired Praefectus Vigilum
NRA Endowment Member
todd51 is offline   Reply With Quote
Old 01-12-2012, 03:13 PM   #4
PanhandlePop
V.I.P. Member
 
Join Date: May 2011
Posts: 253
Default Re: 9mm Bullet weight?

Shoot what works best for you and your gun(s). I have read that there have been some 115 issues related to function when used in Glocks and Glocks with aftermarket barrels, but not a reason not to use them if they work for you. I find that in my carry weapon 147 gr bullets function fine and are more accurate than lighter bullets I've used--but that's me...
PanhandlePop is offline   Reply With Quote
Old 01-12-2012, 04:54 PM   #5
JLA
*TFF Moderator/Host*
 
JLA's Avatar
 
Join Date: Feb 2007
Location: Heart Of Texas
Contributor
Posts: 17,328
Default Re: 9mm Bullet weight?

the 115s will make good paper punchers and beer can busters. They are cheap too.

Only time youd be 'better off' is if you have a POI/POA discrepancy (only an issue with fixed sights) or for some odd reason your iron just dont like 115s.

I personally prefer 124 gr in the 9mm Luger. I find them a bit more accurate than the 115s and the 147s
__________________
It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze.

The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do.

Fact of life:
After Monday and Tuesday, even the calendar says WTF!


JLA is offline   Reply With Quote
Old 01-12-2012, 08:50 PM   #6
312shooter
Advanced Senior Member
 
Join Date: Mar 2008
Location: Las Vegas NV
Posts: 1,148
Default Re: 9mm Bullet weight?

Yep, the 115's are less expensive but the 124's typically perform a touch better from my G17 and XD. The difference is subtle, but my pet load is a 124 over Power Pistol.
__________________
"Democracy is based on citizenship- perhaps the greatest gift the United States has given to the world- Power is vested in the people themselves, and government flows from the people" James M Henslin
312shooter is offline   Reply With Quote
Old 01-13-2012, 12:32 PM   #7
Dirtypacman
Senior Member
 
Dirtypacman's Avatar
 
Join Date: Mar 2008
Location: Merrimac Valley, MA
Posts: 908
Default Re: 9mm Bullet weight?

Think I will give the 124's a chance. Thanks for the information very helpful.
__________________
Member HHRG and HSC, NRA Life Member, GOAL Member
LTC-A
Dirtypacman is offline   Reply With Quote
Old 01-13-2012, 12:50 PM   #8
Ron01013
Member
 
Join Date: Dec 2011
Location: MA.
Posts: 19
Default Re: 9mm Bullet weight?

Thanks for all the info...will try the 124's
My 92fs is shooting below POM with 115's
My load is 4.6grs of Bullseye...is the a better powder to uae????
Ron01013 is offline   Reply With Quote
Old 01-13-2012, 08:25 PM   #9
JLA
*TFF Moderator/Host*
 
JLA's Avatar
 
Join Date: Feb 2007
Location: Heart Of Texas
Contributor
Posts: 17,328
Default Re: 9mm Bullet weight?

Bullseye is a good powder for the 9. Thye 124s will have a bit higher POI than the 115s
__________________
It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze.

The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do.

Fact of life:
After Monday and Tuesday, even the calendar says WTF!


JLA is offline   Reply With Quote
Old 01-14-2012, 11:04 PM   #10
Regular Joe
V.I.P. Member
 
Join Date: Sep 2010
Posts: 269
Default Re: 9mm Bullet weight?

Bullseye can't reach full power in any 9mm load, except lead or plated bullets, which aren't loaded to full power for the cartridge. Pressure runs VERY high for the velocity attained. For 115 gr. jhp bullets, I prefer HS-6, and my standard load is a 124 gr. jhp with lotsa' Blue Dot. Both of these powders reach the highest power obtainable from the caliber without running terrible pressure. If popping jugs and the like is your game, hot HP's are the ticket!
__________________
Around here, we don't say "Oh shucks", or "oh man". We say Oh BAMA!!

Last edited by Regular Joe; 01-14-2012 at 11:05 PM..
Regular Joe is offline   Reply With Quote
Old 01-20-2012, 06:47 PM   #11
prof_fate
Former Guest
 
Join Date: Jan 2012
Location: Western PA
Posts: 143
Default Re: 9mm Bullet weight?

Quote:
Originally Posted by todd51 View Post
I switched because some of my 9mm pistols and those of some of the other Old Guys were hitting below the point of aim. JLA one of the local forum experts suggested that I move up to the 124 grain from 115 as it would probably print higher. He was 100% right and they now hit at point of aim. For serious social work I am loaded with 147 gr.

Interesting...I got an xdm this week and the only ammo i have for it is the cheap stuff from wally world - 115g and it does hit low.

I've been reading up on reloading and bullet length to barrel rifling twist rate is critical for good accuracy. The formula for figuring this was thought up by greenhill in 1879.
Read more here (about 2/3 down the page) http://en.wikipedia.org/wiki/Rifling
and here's a calculator for ya http://kwk.us/twist.html

Heaver bullets are of course longer.
prof_fate is offline   Reply With Quote
Old 01-20-2012, 07:27 PM   #12
JLA
*TFF Moderator/Host*
 
JLA's Avatar
 
Join Date: Feb 2007
Location: Heart Of Texas
Contributor
Posts: 17,328
Default Re: 9mm Bullet weight?

Try a box of speer lawman 124 gr in that XDm prof. Im bettn theyll rag out a nice golfball sized hole at POA in a 25 yd target.

Welcome to TFF
__________________
It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze.

The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do.

Fact of life:
After Monday and Tuesday, even the calendar says WTF!


JLA is offline   Reply With Quote
Old 01-20-2012, 08:49 PM   #13
todd51
Advanced Senior Member
 
todd51's Avatar
 
Join Date: Mar 2009
Location: Central, Ohio
Contributor
Posts: 2,575
Default Re: 9mm Bullet weight?

Mike Venturino has a nice article "Point of Aim Vs. Point of Impact" in the the March/April 2012 issue of American Handgunner.


I get to read this fine magazine thanks to a TFF giveaway. Thank you TFF.
__________________
Retired Praefectus Vigilum
NRA Endowment Member

Last edited by todd51; 01-20-2012 at 10:25 PM..
todd51 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:05 AM.

STILL SEARCHING FOR SOMETHING? TRY THE TFF "GOOGLE" SEARCH ENGINE BELOW!
Google

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
Copyright ©2002 - 2013, TheFirearmsForum.Com