Re: Reloading - help
All you need to get started is a press, some powder, brass, primers, bullets, and a book (go by the book on all loads). I started out with a set of scales, a three stage turent perss, and an auto priming tool from Lee. When I sit down at my press I usually load about 500 rds at a time. You will need a primer pocket cleaner, and you will eventually need a case trimer. I use a simple powder dump that can be adjusted for different ammounts of powder, and weigh my powder about 1 in 10 once I have it dialed in. One more thing you will need, a bullet puller. Read your book, do what it tells you to do, and nothing more! You don't need any videos or anything else, just follow the instructions in the book.