Square Deal Rolling!!
Correct belling would be: Lead or plated bullets .015-.020
Jacketed bullets .010-.015
Measure: outside diameter of case mouth, then the case body 1/4 inch below the mouth (diff should be as described above).
The above reply to my email to Dillon was answered Monday...Got to the reloading cave and followed the above..
My case measured 0.70...so I readjusted the funnel and hit it at 0.87 on first try..Since Im loading cast bullets, I left it at that... Im now cranking out rounds without problem or excessive flare....I think the SQD will be as fast or nearly as fast as the 550 once I get used to it.
I must not have found the 'sweet-spot' last week when I was trying different adjustments without any luck..Either someone goofed on the factory setup, or possibly everything is adjusted excepting the funnel...anyhoo...Since I didnt know if the mega-mouth flare was correct or not, there was a little headscratching on my part...
I would suppose this expansion info should apply to most any caliber and be appropriate for any Dillon Press..
Thanks to all who offered suggestions..
Ineptocracy (in-ep-toc'-ra-cy) - a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.